Launch CRT5011E tire pressure sensor reset tool code reader & diagnostic tool is specially developed by LAUNCH, which enables users to trigger TPMS sensor, program TPMS sensor, perform the relearning procedure and check sensor part number. Additionally, it also supports all 10 modes as OBD2 scanner for a complete diagnosis.

With built-in help menus and code definitions, diagnosing and repairing that dreaded Check Warning Light is now easier than ever!

Launch CRT5011E TPMS Tool Highlights:

• LAUNCH CRT5011E is a powerful and versatile tpms & obdii 2-in-1 tool.
• Launch CRT5011E can program the sensor by receiving multi-frequency 315MHz/433MHz. Only support LAUNCH Sensor.
• LAUNCH CRT5011E TPMS Relearn Tool can easily activate most of the known OEM TPMS sensors.
• Free Lifetime Upgraded, You can update your CRT5011E from your PC at any time without any cost
• Besides writing the Sensor ID into ECU, it can read sensor ECU ID from TPMS. CRT5011E also supports the diagnosis of 99% of the models on the market.
• CRT5011E tpms tool supports 10 languages: English, French, Russian, German, Italian, Japanese, Korean, Spanish, Portuguese, Chinese. You can configure the system language of the tool to your preference language.

Launch CRT5011E TPMS programming tool functions:

1. TPMS:

Activate and match with all 315 MHz / 433 MHz tire pressure sensors
Reset, relearn* and reprogram tire pressure sensors fast.
(“relearn” is write new sensor ID to the vehicle’s ECU, but Some models need to work with the X431 tablet series in order to be written to. Such as PRO ELITE or CRP 919X BT.)
Diagnose the tire pressure issues and turn off the warning light by relearning and programming your new tire pressure sensor.
Reprogramming LAUNCH LTR01/LTR03 sensors, Please choose LAUNCH LTR03 sensors here
Read tire pressure, tire temperature and battery status accurately
Reprogram up to 8 sensors at one time
Provide TPMS relearning procedures and sensor OE number lookup
Multiple ID generation methods: Automatic creation/Manual creation/Copy ID by Activation/Copy by OBD/Creat Multi-sensor (1-8)

2. Full OBD diagnosis:

Read dynamic data streams and MIL/Read readiness status/Freeze frame data/Read DTCs/Clear DTCs/O2 sensor test/On-board monitor test/Read vehicle information, etc.

Please connect the OBD2 port and start the engine before use.
Note: For indirect TPMS vehicles, only the Relearning function is supported. For vehicles using Direct TPMS, it generally includes Activation, Programming and Relearning. The available TPMS functions may vary for different vehicles being serviced.

Why do you need Launch CRT5011E obd2 scanner with tpms relearn?

Tire Pressure Monitoring helps drivers to properly maintain their vehicle tires, improves vehicle safety and fuel efficiency. 33,000 crashes are a result of under-inflated tires. 75% of roadside flats are caused by a slow leak or under inflation. 35% of drivers admit to never checking tire pressure. NHTSA estimates TPMS could save as many as 660 lives annually. What will you do when you notice the illuminated TPMS warning light？

✘ – Ignoring the warning light will cause you are risking tire failure or even serious injury.

✘ – Going to the workshops for a comprehensive check is effective, but it will cost more than your budget.

✔ – LAUNCH CRT5011E costs little of the money to check TPMS in a workshop and it can perform the same professional functions as well.

5 Modes to Program Launch LTR01 Sensors and Other Unencrypted Sensors

The Launch CRT5011E TPMS sensor programmer tool can program all Launch LTR01 sensors and Other Unencrypted Sensors, including 315MHz and 433MHz, to replace damaged sensors.
CRT5011E has 5 modes to program Launch LTR01 Sensors and Other Unencrypted Sensors:

• Auto Create: This function is designed to program the LAUNCH-sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. Select the wheel which needs to be programmed on the tool, place a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID.
• Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available.
• Copy ID by activation: It can get tire pressure sensor ID when the tire sensor is working normally, you can write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.
• Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU. It can be used if the sensor is damaged and the original ID is saved in the vehicle system. You can use it to get the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor.
• Creat Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time.

Launch CRT5011E TPMS Tool can activate 315/433 MHz Sensors

TPMS Sensor Activate:

Launch CRT5011E TPMS Diagnostic Tool allows users to activate TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, battery condition(voltage).

TPMS Relearn:

Stationary Relearn: Require the vehicle to be placed in the “Learn Mode”, follow the screen instruction to activate sensors, and perform stationary relearn.
OBDII Relearn: Allow the CRT5011E to directly write TPMS sensor IDs to the TPMS module via the OBD connector.
Auto Relearn: You can complete relearning by driving and refer to the on-screen Relearn Procedure for the exact details of the process.
Due to different car models, OBDII Relearn, Stationary Relearn, and Auto Relearn may not exist at the same time. Some models have all 3 relearn methods, but some models may only have one or two relearn methods.

!!! Attention >>>>>>>

1. LAUNCH CRT5011E TPMS Relearn Tool is specially designed to diagnose electronic control systems of 12V vehicles. Please note that it is NOT suitable for a six-wheeled dual-rear car.
2. For early magnet-activated sensors, place the magnet over the stem and then place the tool alongside the valve stem.
3. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the tool alongside the stem while pressing the button.

!!! If you want to activate/check/read the tire pressure sensor, please point the CRT5011E TPMS Tool within 30cm of the sensor.

!!! To activate/check/read the tire pressure sensor, please ensure that you have selected the correct car model, year and frequency of tpms sensor.

!!! If you cannot activate/check/read the tire pressure sensor, please try other car years and frequencies.

!!! If you still can’t activate/check/read the tire pressure sensor, please try deflating the tires while activating it(Some models require).

!!! If it still fails to activate/check/read the sensor, PLEASE FEEDBACK Your Car Model, Year and Sensor OEM Part Number to us(sales@x431tool.com). 

More information for Launch CRT5011E TPMS code reader & diagnostic tool please check here >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

4pcs Original Launch LTR-03 RF Sensor 315MHz & 433MHz 2 in 1 Programmable TPMS Sensor (Metal Valves/Rubber Valves)

Notes:

1. 2 in 1 Programmable TPMS Sensor
2. Battery Life of 4 to 6 Years
3. Over-the-Air Wireless Programming
4. With 2 Version: Metal Valves/ Rubber Valves
5. Compatible with OE Sensors of 315MHz/ 433MHz
6. Unlimited Number of Reprogramming for LAUNCH Sensors

Description:

Features with an international leading automotive grade chip, the pressure value of LTR-01 can be accurate to 0.1 BAR.  The high Precision Air Valve can effectively prevent air leakage and ensures durability and stability. With the outstanding and reliable OE level performance, LTR-01 can replace all originalreplace original tire pressure sensors, copy the original tire pressure sensor data and can be programmed indefinitely.

Launch Radio frequency Rubber TPMS Sensor is a programable universal replacement Tpms sensor which meets original equipment qualityand performance standards.The TPMS Sensor covers over 95% of equipped vehicles and has a 3 to 5 year battery life. , its combines 315 to 433 MHz applications into one sensor

Features:

1. Dual frequency in one sensor, covers 98% vehicle models
2. It can replace all original tire pressure sensors and copy the original tire pressure sensor data
3. Performance comparable to the original factory (support 315MHz, 433MHz), unlimited programming,  convenient and durable non-destructive installation
4. Features with an international leading FXTH87 automotive grade chip, pressure value can be accurate to 0.1 BAR
5. The high Precision Air Valve effectively prevents air leakage and ensures durability and stability

How to Use the Launch LTR-03 RF Sensor?

1. Tire pressure learning:
Use the tire pressure learning function of a tire pressure diagnostic tool, follow the steps to operate. (Part of the vehicle learning process is self-learning, the tire pressure sensor will automatically activate after a short distance driving

2. Install the Tire:
Put the tire with the installed tire pressure sensor back on the vehicle

3. After the vehicle self-learning, the tire pressure sensor system is activated successfully, and the dashboard will show the normal tire pressure.

Specification:

Package List:

1pc x LAUNCH CRT5011E host
1pc x card reader
1pc x charger
1pc x USB cable
1pc x main cable
1pc x black bag
1pc x EU-standard adapter
1pc x US-standard adapter
4pcs x Launch LTR-03 RF Sensor

Package includes:
1* PC adapter for Launch X-prog3
1* Gearbox connectors set for X-prog3

Launch X431 IMMO Programmer X-PROG3 PC Adapter Features:

1. Used in conjunction with X-PROG3 anti lift matching programmer
2. 2D menu, clear and easy to choose
3. Powerful search function
4. Convenient modification of ECU data
5. USB communication, with a speed more than three times that of Android devices, making it more stable
6. Easy to copy data
7. Support engine data validation function
8. 1 year of free update online. Optimize expired device usage status so that features released before expiration can still be used when the device is in an expired state.
When a free subscription expires, new updates will be restricted from being downloaded. After 1 year, please check here for renewal.

-Software Newest Updated in January 14, 2025:
1. Added read and write, personalization, clearing function for BOOT mode Benz transmission ECU VGS4-0-NAG2, VGS4-500-NAG2.
2. Added BENCH mode Cadillac, Chevrolet transmission ECU T87A read and write function.
3. Added read and write function for BENCH mode Great Wall transmission ECU 7DCT450.
4. Added read and write function for BENCH mode Great Wall, Geely engine ECU MG1US008/MG1UA008.
5. Optimized BMW E83 data read issue.
6. Optimize expired device usage status so that features released before expiration can still be used when the device is in an expired state. When a free subscription expires, new updates will be restricted from being downloaded.

Software download link: https://en.cnlaunch.com/download 

Drop down and click “Download”

Software language: English, German, Japanese, Russian, French, Portuguese, Korean, Italian, Arabic, Traditional Chinese

Select the corresponding language setup to install.

Support list June 2023:

How to Use Launch X-prog3 PC Adapter?

Firstly, connect the X-PRO G3 PC ADAPTOR to the computer using a cable, and then connect the X-PROG3 PC ADAPTOR to G3. Secondly, click to enter the software (without connecting the X-PROG3 PC ADAPTOR and G3, the software cannot be accessed). The serial number will be automatically recognized from the X-PROG3 PC ADAPTOR. The activation code needs to be obtained from the envelope of the X-PROG3 PC ADAPTOR. Thirdly, click [Activation] (only once,    no need to activate it again later), as shown in Figure 1

I.ECU Data Reading/Writing

1. Obtain the related ECU.

(1) Method 1: Obtain the desired ECU type through brand > model > engine > ECU in turn, as shown in Figure 2.

(2) Method 2: Query the desired ECU by entering a value in the search box. The search categories include brand, Bosch number and ECU type. For example, search for the MED17.5.25 engine by ECU type, as shown in Figure 3.

2. Click [Straight Connection Line Diagram] to obtain the ECU connection diagram, as shown in Figure 4.

3. Connection: Connect the ECU and PCBOX according to the information provided in the connection diagram. The physical connection diagram of MED17.5.25 (using the BENCH mode line) is shown in Figure 5, and the physical connection diagram using the gearbox adapter is shown in Figure 6.

4. Read the chip ID, as shown in Figure 7.

5. Back up the EEPROM data and save it, as shown in Figure 8 (the figure shows the save page of the read data).

6. Back up the FLASH data and save it, as shown in Figure 9 (the figure shows the process of reading FLASH data).

7. Restore EEPROM/FLASH data, as shown in Figure 10 (the figure shows the file selection page).

II. Data Processing
1. Click the [Data Processing] button on the main page, as shown in Figure 11, and select [Immobilizer Shutoff and File Checkout] [Data Cloning] process Volkswagen series and Porsche engine data, as shown in Figure 12.

2. File verification and anti-theft shutdown (process: select file > connect network to obtain > save file), as shown in Figure 13.

Launch Gearbox Adapters

	Accessory Name	Material  code	function	picture
1	X-PROG3 Adapter Cable 1 (DQ200XX)	307110077	Used to connect the DQ200XX gearbox, and available models include VW, Audi, etc.
2	X-PROG3 Adapter Cable 2 (VL381)	307110078	Used to connect the VL381 gearbox, and available models include VW, Audi, etc.
3	X-PROG3 Adapter Cable 3 (DQ380)	307110079	Used to connect the DQ380/DQ381/DQ500 gearbox, and available models include VW, Audi, etc.
4	X-PROG3 Adapter Cable 4 (DQ250)	307110080	Used to connect the DQ250 gearbox, and available models include VW, Audi, etc.
5	X-PROG3 Adapter Cable 5 (DL501)	307110081	Used to connect the DL501XX gearbox, and available models include VW, Audi, Porsche, etc.
6	X-PROG3 Adapter Cable 6 (DL382)	307110082	Used to connect the DL382 gearbox, and available models include VW, Audi, etc.
7	X-PROG3 Adapter Cable 7 (VGS-NAG3)	307110083	Used to connect the VGS-NAG3 gearbox, and available models include Benz, Nissan, etc.
8	X-PROG3 Adapter Cable 8 (VGS2-FDCT/VGS-FDCT)	307110084	Used to connect the VGS-FDCT/VGS2-FDCT gearbox, and available models include Benz, Infiniti, etc.
9	X-PROG3 Adapter Cable 9 (VGS3-NAG2)	307110085	Used to connect the VGS3-NAG2 gearbox, and available models include Benz, etc.
10	X-PROG3 Adapter Cable 10 (8HP_V1(BMW/LR)/8HP_V2/8HP_V3)	307110086	Used to connect the 8HPXX/AL450/AL551/AL552 gearbox, and available models include BMW, Land Rover, Jaguar, Dodge, Alpina, Chrysler, Rolls Royce, Alfa Romeo, Aston Martin, Great Wall, Jeep, Lamborghini, Maserati, Iveco, etc.
11	X-PROG3 Adapter Cable 11 (MPS6)	307110087	Used to connect the MPS6/MPS6_GEN3 gearbox, and available models include Ford, Renault, Chrysler, Dodge, Land Rover, Volvo, etc.
12	X-PROG3 Adapter Cable 12 (DPS6)	307110088	Used to connect the DPS6 gearbox, and available models include Ford, etc.
13	X-PROG3 Adapter Cable Main Cable (ML)	307110089	The extension wire of the gearbox harness, with one end connected to the immobilizer programmer and the other end connected to the gearbox harness

LAUNCH X-431 PRO STAR ADVANCED FEATURE:

1. Lower Price: X431 PRO STAR is an upgrade based on X-431V/X-431 PRO Elite/X-431 PROS Elite, It has the Same functions, but price is lower!
2. Advanced ECU Coding: Top-level coding functions provide Online Coding, Online Calibration, Online Parameterization, Component Matching, Personalization, Modification & Retrofit, PMI Functions, etc.
3. 31 Reset Functions: One LAUNCH scan tool is enough for common repairs. 32 services combine hot reset with full car supports and most needed special functions for specific cars.
4. Top-level Configuration with Faster Speed: Android 10.0, 2.0 GHz 4-Core CPU, 4GB RAM, 64GB ROM, 8” Touchscreen, 2.4 & 5 GHz WiFi, 6000mAh Battery, 8MP Rear Camera
5. Bi-directional Control: Operate various active tests to locate module trouble in minutes.
6. VAG Guided Functions: Professional step-by-step instructions do not need your repair skill, which guide you to solve problems perfectly.
7. Support CANFD & DoIP protocols: Communicate more car models and run faster diagnostics.
8. Key Programming: Work with X-PROG3 Programmer.
9. Expanded Supports: X431 i-TPMS, Launch VSP-600 Videoscope, BST360 battery tester, X431 WIFI Printer, etc.
10. Quick Vehicle Identification: Auto VIN Technology.
11. FCA SGW Car Access: Compatible with Fiat, Chrysler, Alfa Romeo, etc.
12.10000 Car Coverage, Serve Global 98% Cars.

Launch i-TPMS TPMS Service Tool Highlights:

1. US/EU/UK Ship, No Tax (Only EU address)
2. The standalone mode working with the i-TPMS app
3. The firmware version supports online upgrade, currently version V1.14
4. The i-TPMS serves over 98% of mainstream vehicles with a TPMS-equipped system available on the market.
5. i-TPMS service Can be Used with an X-431 scanner or using it standalone with the i-TPMS APP.
6. Launch i-TPMS Support Language:
1)Device language: English and Chinese
2)i-TPMS App language: Chinese, English, Italian, French, Russian, Spanish, German, Polish, Korean, Japanese, Portuguese, Arabic
[When the app software switches to Chinese, the device will also display Chinese simultaneously. Except for Chinese, the device will all display English. ]

NOTE:

1. Compatible X-431 scanners:

– Pro Series: LAUNCH X-431 V/ X-431 V / X-431 Pro TT/ X-431 Pro3 ACE/ X-431 Pro5/ X431 Pro3S /X431 ProS 1.0/ X431 Pro Elite, PROS ELITE/ X-431 PROS V5.0/ X431 PRO3 APEX
– PAD Series: LAUNCH X-431 PAD III/ X-431 PAD V/ PAD VII
– NEW! CRP919 Series: CRP919E BT, CRP919X BT and ect.

2. LAUNCH i-TPMS has the same function as TSGUN. Still, with the additional function of connecting to the cell phone, it can complete tire pressure activation, programming and ID copying on the cell phone anytime and anywhere.
3. The newest LAUNCH i-TPMS user manual please check here>>>>
4. Can be Bound with X-431 Scanner or with the i-TPMS APP Supports All 315/433MHz Sensors

More Extended Functions Make Work Easier (sold separately)

1.  X431 Printer (Print out diagnostic data/ reports.)
2.  Launch VSP-600 Video Scope: Check unseen parts and give you a direct image of the engine, gears, compressors, headers and valves, and body components.
3.  LAUNCH X431 O2-2 Oscilloscope Scopebox 
4.  Launch X-431 Sensorbox S2-2.
5.  BST360 battery tester.: For Battery Cranking system Test, Battery Charging system Test, Battery Health Test.
6.  X431 TSGUN or Launch X431 i-TPMS (This kit already have itpms tool)
7.  X-PROG3 Programmer.
8.  LAUNCH CRT5011E

Package list:

1* Full kit of X-431 PRO STAR
1* Full kit of Launch X431 i-TPMS

LAUNCH X-431 PRO STAR ADVANCED FEATURE:

1. Lower Price: X431 PRO STAR is an upgrade based on X-431V/X-431 PRO Elite/X-431 PROS Elite, It has the Same functions, but price is lower!
2. Advanced ECU Coding: Top-level coding functions provide Online Coding, Online Calibration, Online Parameterization, Component Matching, Personalization, Modification & Retrofit, PMI Functions, etc.
3. 31 Reset Functions: One LAUNCH scan tool is enough for common repairs. 32 services combine hot reset with full car supports and most needed special functions for specific cars.
4. Top-level Configuration with Faster Speed: Android 10.0, 2.0 GHz 4-Core CPU, 4GB RAM, 64GB ROM, 8” Touchscreen, 2.4 & 5 GHz WiFi, 6000mAh Battery, 8MP Rear Camera
5. Bi-directional Control: Operate various active tests to locate module trouble in minutes.
6. VAG Guided Functions: Professional step-by-step instructions do not need your repair skill, which guide you to solve problems perfectly.
7. Support CANFD & DoIP protocols: Communicate more car models and run faster diagnostics.
8. Key Programming: Work with X-PROG3 Programmer.
9. Expanded Supports: X431 i-TPMS, Launch VSP-600 Videoscope, BST360 battery tester, X431 WIFI Printer, etc.
10. Quick Vehicle Identification: Auto VIN Technology.
11. FCA SGW Car Access: Compatible with Fiat, Chrysler, Alfa Romeo, etc.
12.10000 Car Coverage, Serve Global 98% Cars.

Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer XPROG 3 Chip Reader

X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

X-431 GIII X-PROG 3 Highlights:

*** Ship From US/EU/UK, fast delivery, Free tax!
*** LAUNCH Official authorized dealer, 100% original

1. All-in-One Key Programmer. Integrates Multiple Function Models.
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: PRO ELITE/ PROS ELITE, X-431 V, X-431 V , X-431 PAD V, X-431 PAD VII, X431 PRO5, X431 PRO3S V5.0, X431 Pro3 Apex, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc.
4. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
5. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
6. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4 / FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
7. The IMMO LICENSE please check here.
8. NEW!!! Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost
9. NOTE: If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII, you must connect this key programmer with tablet, otherwise it will give error device no response.

More Extended Functions Make Work Easier (sold separately)

1.  X431 Printer (Print out diagnostic data/ reports.)
2.  Launch VSP-600 Video Scope: Check unseen parts and give you a direct image of the engine, gears, compressors, headers and valves, and body components.
3.  LAUNCH X431 O2-2 Oscilloscope Scopebox 
4.  Launch X-431 Sensorbox S2-2.
5.  BST360 battery tester.: For Battery Cranking system Test, Battery Charging system Test, Battery Health Test.
6.  X431 TSGUN or Launch X431 i-TPMS 
7.  X-PROG3 Programmer. (This kit already have GIII tool)
8.  LAUNCH CRT5011E

Package list:

1* Full kit of X-431 PRO STAR
1* Full kit of Launch X431 GIII X-PROG 3

Launch X431 PROS V5.0 Feature:

1. New diagnostic VCI for DBSCar VII supports more communication protocols,such as CAN, CANFD, DoIP*, etc.
2. Wireless communication offers flexible and easy connections for diagnostics, A cabled connection offers a fast stable connection for advanced work like coding
3. Full system vehicle coverage for U.S., Asian and Europen markets over 110 brands, The vehicle coverage is continuously updating to cover more
4. Full diagnostic functionality includes comprehensive OBDII diagno stics, read/clear DTCs, bi-directional control, remote diagnosis, live data streaming, coding, etc
5. Review the previous diagnostic reports by tapping the menu of the Diagnostic History
6. One-step info Center includes vehicle repair information and the latest updates
7. Built-in repair information and training videos help to track and fix issues fast
8. Optional ADAS calibration function increases more revenue

Click here to get more info about Launch X431 PROS V5.0=============>

With X431 i-TPMS: Active and relearn TPMS sensors; and program LAUNCH TPMS sensor.

LAUNCH i-TPMS Tire Pressure Detection Handheld Terminal is the upgraded model of TSGUN. It is a professional tire pressure diagnostic tool that integrates TPMS sensor activation, reading, learning and programming. It can be used together with i-TPMS cell phone APP to complete the functions of tire pressure activation, programming and copying ID.

Features:

1. 1.77 inch color screen
2. The i-TPMS serves over 98% of mainstream vehicles with a TPMS-equipped system available on the market.
3. Experience TPMS service by binding it with an X-431 scanner or using it standalone with the i-TPMS APP.
4. Supports all 315/433MHz sensors.
5. Binding it with an X-431 scanner: Activation, Programming, Relearn and Diagnosing for sensors.
6. The standalone mode working with the i-TPMS app: Activation and Programming for sensors.
7. Supports unlimited programming for LAUNCH sensors to replace OE sensors.

Launch i-TPMS vs TSGUN:
They share the same function. TSGUN must combine with X-431 scanners. It is not standalone. i-TPMS works standalone via phone App, it also combines with X431 scanners.

Launch i-TPMS mobile APP Function:

1. Support vehicle selection or OE part number tpms sensor activation
2. Support vehicle selection or OE part number tpms sensor programming
(1) Manually create ID programming
(2) Automatically create ID programming
(3) Copy and create ID programming. For this functional device, you must first activate the original tpms sensor, obtain the sensor ID, and then copy
3. Support unit switching, sensor ID: decimal/hexadecimal, temperature: degrees Celsius / degrees Fahrenheit, pressure: kPa /Psi /Bar
4. Can generate tire pressure check report
5. Currently supports Android system.
6. The device does not need to be registered or activated. After installing the app software, open it and search for Bluetooth connections to use it.
7. Support autel tpms sensor programming and activation
8. The Android mobile app software can be downloaded by scanning the QR code on the back of the host or in the instruction manual.

Service Functions For X431 PRO(PROS V5.0): 

• Oil Maintenence Reset
• Immobilizer Reset
• Steering Angle Reset
• IMMO Program
• Electronic Throttle Relearn
• Battery Matching
• TPMS Reset Database
• DPF Regeneration
• Brake Reset
• Injector Coding
• ABS Bleeding
• Crank Position Sensor Adaptive Learning
• Gearbox Relearn
• Adblue Reset
• EGR Adaption
• Transport Mode
• Windows Calibration…

Specifications:

Package List: 

1pc x Main Unit LAUNCH X431 PROS V5.0
1set x OBD1 Cables and adapters
1set x Launch TSGUN TPMS Tool

X-431 V+ is a new Android-based vehicle trouble diagnostic device developed for internet applications via Bluetooth/Wi-Fi. X431 V+ combines the advantages of X-431 IV and X-431 Diagun III. X-431 V+ is suitable for a wide vehicle coverage, it can share maintenance data and case library, provide instant maintenance information, and build public and private maintenance social circles. X-431 V+ could support 12V light trucks. Moreover, X-431 V+ could coordinate with X431 Smartlink C2.0 Truck Module, then could support 24V trucks.

Highlights:

1. Global Version, No IP Limitation.
2. 2 Years Free Update Online. When the Free Update Expired, the Update Cost will be Here for One Year and Here for Two Years.
3. NEW!!! Support CANFD and DOIP car protocols, Supports Topology Mapping diagnosis: Newly update VCI DBScar VII can work on the car with CANFD and DOIP protocols. Communicate more car models and run faster diagnostics.
4. Wilder Vehicle Coverage: Covers more than 98% of the cars on the market from the USA, European, Asia and so on.
5. Advanced ECU Coding & Online Coding: Perform advanced ECU coding on more vehicles. Online Coding to update the vehicle ECU software, refresh hidden features to disable annoying functions, like disabling seat belt beep, and daylight running light, and Match certain components after repairs or replacements
6. 37+ Special Functions: Comprehensive services, calibrations, resets, initializations, relearns options for daily auto maintenance services and up to 300+ for special models.
7. Bi-Directional Control (Active Tests): The intelligent diagnostic scanner can output commands to ECUs, read data, and monitor the operation of the actuators. Through bi-directional operation, you can quickly know if a specific system, component, or subsystem is functioning properly or not.
8. OE Level All Systems Diagnostics and Auto VIN/Scan VIN/License.
9. More Advanced Functions, Supports Volkswagen Audi guidance function.
10. Support Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc
11. Support Diagnosing Heavy Duty Trucks with Extra X431 Smartlink C2.0 Truck Module: You can purchase an additional heavy-duty truck diagnostic module (a Bluetooth adaptor) that works with X431 V+ to diagnose all truck systems.

UPGRADED HIGH-END HARDWARE CONFIGURATION: What is upgraded in V+ 5.0?

1. 64GB storage (can be extended to 128G RAM with TF card): Keep all your customer information, data files, and vehicle records well-organized.
2. Branded Tablet with Android 10.0 system and 4.0 MP Pixel Front & Rear Camera, updated the ECU from 1.4GHz to 2.0GHz. Upgraded the Android OS system from 9.0 to 10.0. ease of use, speed, and functionality.
3. Fixed battery life issue. Now 6300 mAh lasting nearly 10 hours of continuous use on a single charge. improved the battery performance to increase the battery life.
4. Fixed more bugs and Upgrade new car makes up to 2024 models, V+ 4.0 has been changed to V+ 5.0.
5. Dual Wi-Fi (5GHz): Supports both 2.4GHz and 5GHz Wi-Fi, which offers faster, more stable, strong anti-interference data transmission (equivalent to USB communication). And the actual wireless working range is more than 10m.
6. NEW!!! Support CANFD and DOIP car protocols: Newly updated VCI DBScar VII can work on the car with CANFD and DOIP protocols. Communicate more car models and run faster diagnostics.

LAUNCH X431 PRO3(V+ 5.0) Support Extension Modules: (So that you can perform more comprehensive vehicle inspections with LAUNCH X431 V+)

* X431 XPROG3 GIII (IMMO For VAG Group Above 3.5)
* Launch BST-360 (Test Your Battery with Accuracy and Simplicity)
* X431 Smartlink C2.0 Truck Module (Diagnose gasoline vehicles & Diesel Trucks)
* X431 TSGUN or X431 i-TPMS (Activate all sensors, tpms relearn, program only Launch Sensors)
* WIFI Printer (Print codes and their definitions, along with live data, coding information and relearn procedures)
* Launch VSP-600 Inspection Camera Videoscope

Highlights of X431 V+ with X-PROG3:

1. Global Version, No IP Limitation
2. Package Contains Full Set Launch X431 V+ and Launch GIII X-PROG3
3. Vehicle Coverage: Supports about 80 car brands from USA, European, Asian and so on.
4. Supports More Advanced Functions, including Actuation Test and Guiding Functions (compatible with VW, AUDI, SKODA, SEAT).
5. Support Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc
6. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
7. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
8. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.

New Added OE-LEVEL Advanced Functions of LAUNCH X431 V+

Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Power Balance: Compatible with Chrysler / GM / Ford etc.
Programmable Module Installation: Compatible with Ford / Mazda etc.
Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.√ Actuator Test : Injector Test ;Turn Off ACC Lane Keeping Assist

* For BENZ
Optimized ADAS (Advanced Driving Assistance System) function for SSLink products.
Optimized the function of Query VIN for police equipment.
Updated DPF function(Regeneration of the diesel particulate filter while driving) of diesel engine (CRR1, CRD2, CR43, CR6, CR6EU5, CR6BIN5EU6) under 117, 212, 207, 204 and more chassis.

* For LANDROVER
Added the special function of Camera Calibration for Land Rover models in the year range of 2010 to 2014
Added special functions related with ADAS (Advanced Driving Assistance System) for all models of Jaguar and Land Rover in the year range of 2017 to 2020.

* For SPRINTER
Added actuation test and special functions for the headlight range regulation module, reversing camera, and 360 degree panoramic camera under chassis 470/471.
Added the data stream and actuation test functions for the systems such as engine, gearbox, gearshift module, fuel pump, drive system, A/C, signal acquisition and actuation control module, and FL door under chassis 907/910.

What Can X431 GIII X-Prog 3 Do For You?

1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/ AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).

Package List:

1set x Launch X431 V+ Full Set
1set x Launch X431 GIII X-Prog3 Full Set

Launch X431 GIII X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicle. Additionally, the X-PROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X-431 V, X-431 V , X-431 Pad V, and more models.

Launch GIII X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4 /FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

• Read/write for BMW CAS4 and FEM chips
• Reading and writing car key chip
• Read for BMW engine ISN code
• Read/write EEPROM MCU….

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X431 V, X431 V , X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell

Launch X431 IMMO Key Programmer:

NOTE: If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII, you must connect this key programmer with tablet, otherwise it will give error device no response.
This kit is designed to avoid such problems below.

Launch X431 IMMO Key Programmer Remote Maker with Super Chip and 4 Sets of Smart Keys is used to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.

Currently, the Launch X431 key programmer can be used with the:

• LAUNCH X431 IMMO ELITE key programmer
• LAUNCH X431 IMMO PLUS key programmer
• LAUNCH X431 PAD Ⅶ Elite
• LAUNCH X431 PAD Ⅴ Elite
• LAUNCH X431 PRO3S 5.0
• PRO ELITE, PROS ELITE, Pro3 APEX, Pro3 ACE and more to come.

Function:

• Read Transponder
• Generate Transponder
• Detect Frequency
• Detect Ignition switch coil signal
• Generate Remote (Launch X431 remote)
• Set type of super chip
• Set type of wireless remote
• Unlock Toyota smart key
• Compatible with Launch super chip
• etc…

Functions of super chips:

• Support the conversion of most car model chip types, and support separate matching to achieve vehicle startup.
• Support chips of the 8A, 8C, 8E, 4C, 4D, 4E, 48, 7935, 7936, 7938, 7939, 11/12/13 types.

Introduction of 4 smart keys:

Product Name	Picture	Usage Scenario	Function
LS4-NISN-01		LS intelligent key is only compatible with vehicle models equipped with the Kessy system, its functions include keyless starting and door edge sensing.	1.Wireless programming 2. Equipped with anti-theft chip 3. Uses the button cell 2032 4. Circuit board with a 2-year warranty 5. Repeatable writing 6. Batteries need to be installed while generating 7. Supports vehicles with 46, 47, MQB48, MQB49, 4A chips
LN3-PUGOT-01		Certain chips in LN remote can’t generate all vehicle models, it’s needed to check whether the type of chip can support the vehicle model, the chip is integrated into the remote.	1．Wireless programming 2．Equipped with anti-theft chip 3．Uses the button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries need to be installed while generating 7．Supports vehicles with 11, 12, 13, 7936, 7937, 7947, 7946 chips
LK3-VOLWG-01		LK remote is applied in the situations where the remote needs to be matched but the chip is not needed, or it can also be used with super chip.	1．Wiring programming 2．Not equipped with an anti-theft chip, needs to be used with an anti-theft chip 3．Uses a button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries cannot be installed while generating
LE4-FRD-01		LE remote contains chip and remote, the multimode chip can generate most of the vehicle models and cover the majority of them.	1．Wireless programming 2．Equipped with a multimode chip 3．Uses a button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries need to be installed while generating

Package List:

1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BENCH mode cable
1pc x MCU converter V1
1pc x MCU converter V2
1pc x MCU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x Benz infrared analog acquisition key
1pc x MCU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual

1pc x Launch X431 Key Programmer
1pc x Super Chip
4pcs x Smart Keys
1pc x Type-C to USB A Converter

X-431 V+ is a new Android-based vehicle trouble diagnostic device developed for internet applications via Bluetooth/Wi-Fi. X431 V+ combines the advantages of X-431 IV and X-431 Diagun III. X-431 V+ is suitable for a wide vehicle coverage, it can share maintenance data and case library, provide instant maintenance information, and build public and private maintenance social circles. X-431 V+ could support 12V light trucks. Moreover, X-431 V+ could coordinate with X431 Smartlink C2.0 Truck Module, then could support 24V trucks.

Highlights:

1. Global Version, No IP Limitation.
2. 2 Years Free Update Online. When the Free Update Expired, the Update Cost will be Here for One Year and Here for Two Years.
3. NEW!!! Support CANFD and DOIP car protocols, Supports Topology Mapping diagnosis: Newly update VCI DBScar VII can work on the car with CANFD and DOIP protocols. Communicate more car models and run faster diagnostics.
4. Wilder Vehicle Coverage: Covers more than 98% of the cars on the market from the USA, European, Asia and so on.
5. Advanced ECU Coding & Online Coding: Perform advanced ECU coding on more vehicles. Online Coding to update the vehicle ECU software, refresh hidden features to disable annoying functions, like disabling seat belt beep, and daylight running light, and Match certain components after repairs or replacements
6. 37+ Special Functions: Comprehensive services, calibrations, resets, initializations, relearns options for daily auto maintenance services and up to 300+ for special models.
7. Bi-Directional Control (Active Tests): The intelligent diagnostic scanner can output commands to ECUs, read data, and monitor the operation of the actuators. Through bi-directional operation, you can quickly know if a specific system, component, or subsystem is functioning properly or not.
8. OE Level All Systems Diagnostics and Auto VIN/Scan VIN/License.
9. More Advanced Functions, Supports Volkswagen Audi guidance function.
10. Support Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc
11. Support Diagnosing Heavy Duty Trucks with Extra X431 Smartlink C2.0 Truck Module: You can purchase an additional heavy-duty truck diagnostic module (a Bluetooth adaptor) that works with X431 V+ to diagnose all truck systems.

UPGRADED HIGH-END HARDWARE CONFIGURATION: What is upgraded in V+ 5.0?

1. 64GB storage (can be extended to 128G RAM with TF card): Keep all your customer information, data files, and vehicle records well-organized.
2. Branded Tablet with Android 10.0 system and 4.0 MP Pixel Front & Rear Camera, updated the ECU from 1.4GHz to 2.0GHz. Upgraded the Android OS system from 9.0 to 10.0. ease of use, speed, and functionality.
3. Fixed battery life issue. Now 6300 mAh lasting nearly 10 hours of continuous use on a single charge. improved the battery performance to increase the battery life.
4. Fixed more bugs and Upgrade new car makes up to 2024 models, V+ 4.0 has been changed to V+ 5.0.
5. Dual Wi-Fi (5GHz): Supports both 2.4GHz and 5GHz Wi-Fi, which offers faster, more stable, strong anti-interference data transmission (equivalent to USB communication). And the actual wireless working range is more than 10m.
6. NEW!!! Support CANFD and DOIP car protocols: Newly updated VCI DBScar VII can work on the car with CANFD and DOIP protocols. Communicate more car models and run faster diagnostics.

LAUNCH X431 PRO3(V+ 5.0) Support Extension Modules: (So that you can perform more comprehensive vehicle inspections with LAUNCH X431 V+)

* X431 XPROG3 GIII (IMMO For VAG Group Above 3.5)
* Launch BST-360 (Test Your Battery with Accuracy and Simplicity)
* X431 Smartlink C2.0 Truck Module (Diagnose gasoline vehicles & Diesel Trucks)
* X431 TSGUN or X431 i-TPMS (Activate all sensors, tpms relearn, program only Launch Sensors)
* WIFI Printer (Print codes and their definitions, along with live data, coding information and relearn procedures)
* Launch VSP-600 Inspection Camera Videoscope

Notice:

1. Dealer Code: 86A or 86K.
2. Launch X431 V+ Supports 12V/ 24V Gasoline (Petrol) Cars, 12V for Some Diesel Cars, Not for Trucks, for truck you need but extra X431 Smartlink C2.0 Truck Module. If you only work on 24V cars you can choose LAUNCH X431 V+ SmartLink HD Commercial tool
3. Authorization: When you receive the device, contact our customer sevice and advise the Serial number of your device, also the language and country you want to open authorization, after authorization finished, then you can log on Launch DBSCar Website to register CC account and download software you want.

Features

1. Bigger, Larger storage and Faster working speed than LAUNCH X431 V
2. 10.1 inch multi touch capacitor screen give you better view for diagnose and data stream.
3. Compact size plastic carrying case design, super easy for storage and carrying.
4. Lead to wide vehicles diagnostic community
5. Allows you to print our diagnostic data with Wifi printer.
6. 6600mAh Li battery can keep working 8 hours,portable and reasonable PDA design, easy carry with small size
7. Panel PC: High configuration of hardware , fast running speed
8. Capacitor Screen: Multi-touch capacitor screen, more smooth operation
9. WIFI Diagnosis: Wireless communication between intelligent mobile terminal and DBSCar connector via Bluetooth
10. Portable: Reasonable PDA design, small size for easy carry
11. Optimized Interface: Brand new operation interface design, interface more friendly and operation much easier
12. Wifi communication: Support WIFI network
13. Android System: Users can install and Android software
14. Numerous Additional Functions: Photo, video, multimedia, other software application,etc.

VIEW MORE INFO ABOUT V+  Click here＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞

Launch X431 SmartLink C V2.0 Heavy Duty Truck Module work for Launch X431 V+, X431 Pros3 & X431 PRO5

Launch X-431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7+Cortex-M7, 8G storage, 256M storage, 320*480 resolution. It supports Bluetooth, Wi-Fi, USB and other communication methods, and can be used with X431 V+, X-431 PRO3S and PRO5 series.

It also support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test. Covering Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.

Launch X431 SmartLink C V2. Bullet Points:

1. Launch X-431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7+Cortex-M7, 8G storage, 256M storage, 320*480 resolution.
2. Update Version of Launch X431 HDIII: The transmission speed is faster and more stable, and the visual operation interface makes it more convenient.
3. Support Bluetooth, Wi-Fi, USB and other communication methods.
4. Can be used with Launch X431 V+, X-431 PRO3S and X431 PRO5 series.
5. Support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test.
6. Support commercial vehicles, passenger vehicles, new energy and other models: Covering Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.
7. Support super remote diagnosis.
8. 2 years free update (Starting October 19, 2023), the Annual Subscription cost is 549USD/year after free update service.

Note: LAUNCH X-431 HD SmartLink C 2.0 Module cannot be used alone. It only works with LAUNCH Tablet of X431 V+, X431 PRO3, X-431 PRO3S, X431 PRO5 Series.

Launch Smartlink C Feature:

Work as a VCI (Vehicle Communication Interface)
Work as a Local J2534 PassThru Device
Work as a Remote J2534 PassThru Device

VIEW MORE INFO ABOUT Smartlink  Click here＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞

Package List:

1set x X431 V+ (Full Set with All Cables and Adapters)
1set x X431 SmartLinkC V2.0 Heavy Duty Truck Module(With All Cables and Adapters)

X431 PAD VII Elite is an unexpected high-end diagnostic tool from LAUNCH, comes Support ADAS calibration function, 26 service functions, TPMS service and 8 extended modules functions. New Smartlink C VCI powers technician a new diagnostic level without the limitation of diagnostic functions, tools and vehicle types. X-431 PAD VII Elite is an unexpected high-end diagnostic tool from LAUNCH, comes Support ADAS calibration function, 26 service functions, TPMS service and 8 extended modules functions. New Smartlink C VCI powers technician a new diagnostic level without the limitation of diagnostic functions, tools and vehicle types.

NEWEST Launch X-431 PAD VII PAD 7 Elite Highlights:

1. With 2 Years Free Update Online
2. Global Version Without IP Limitation
3. Topology mapping gives a visual checking on DTCs and all systems communication status, Guided function for VW and AUDI.
4. Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP.
5. Full System Vehicle Coverage for U.S., Asian and European Markets Over 110 Brands, Which is Continually Updated
6. Multi-Language Supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Swedish, Chinese
7. Special Functions Supported: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
8. Support Online Programming Till the Year 2020: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru. (Can’t perform in United States, Canada and Spain)
9. The New Module “MALL” is Now Available for All Users to Expand and Upgrade Their X-431 PAD VII with More Diagnosis Software.
10. The X-431 PAD VII supports ADAS calibration and eight extended modules (Click the link to buy extra):

•  X431 ADAS Moblie/ ADAS PRO, ADAS Activation Card
•  X431 XPROG-3 GIII Key Matching   IMMO license (IMMO functions just like IMMO plus)
•  Launch VSP-600 Video Scope (for up-close visual inspections in confined areas.)
•  X431 TSGUN or Launch X431 i-TPMS (Activate all sensors, tpms relearn, program only Launch Sensors)
•  LAUNCH X431 O2-2 Oscilloscope Scopebox (quickly acquire the circuit signal, and slowly display the waveform to observe and analyze.)
•  Launch X-431 Sensorbox S2-2 (diagnose and simulate vehicle sensor faults quickly.)
•  BST360 battery tester (Test Your Battery with Accuracy and Simplicity)
•  Key programmer

Newly Added Functions:

• Online ECU Programming: Easily reprogram ECU modules on 30 vehicle brands.
• 3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.
• New Protocols: J2534/D-PDU/RP1210 & CAN 2.0/CAN FD/DoIP for faster diagnostics.
• Topology Mapping: Visually show you all system relationships and DTC in color topology.
• OBD PIN Detection: Detect the vehicle protocols and OBDII pin voltage status to help technicians judge the OBD2 interface.
• Diagnostic Plan: Provides a plan to guide you on how to repair based on the currently detected fault codes.
• User Information: A large amount of diagnostic data is well stored in this module, including Reports, Order, Live Data Stream, etc.

Hot Diagnostic Functions:

• 60 Reset Functions: Cover various Reset/Relearn/Match/Calibration for 99% of cars.
• Wider Coverage: Serve commercial vehicles and 99% of passenger cars (up to 200 brands).
• Higher Updating Frequency: Timely one-click updating could fix all the bugs and bring newer models.
• VAG Guided Functions: Skip the Security Access Code & Channel Number to perform matching, calibration, and make basic settings.
• Bi-directional Control: Quickly pinpoint the vehicle problems of windows, doors, sunroof, etc.

Super Hardware Configuration:

• [5G WiFi Communication] automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic distance, and anti-interference.
• [Universal Physical Interfaces] include USB Type C, USB Type A, Micro-SD, Micro-SIM slot (LTE version), etc.
• [Core Processor Android 9.0 OS] enhance the diagnostic speed of the multi-task process.
• [8 256GB Memory] ensures the smooth multi-task operation and keeps all the customer information, diagnostic data & files, and repair recordings.
• [13.3′ Touchscreen with 1920*1080] gives you a smoother view experience.
• [IP65 Corner Protectors] more waterproof and more resistant to falls

Notes:
1. After 2 Years, Software Subscription click here
2. Can Not Support Online Programming In Spain, Canada, Portugal, Other Countries Won’t Have This Problem
3. PAD VII Can Support ADAS Calibration, But Clients Need To Buy the ADAS Devices To Make It. Without ADAS Devices, Can Not Do ADAS Calibration by PAD VII Only

Newly Added Functions:

NEW! Adds EV diagnostic kit for new Energy Battery vehicles
NEW! Adds “X-431 FIX” function (Need to purchase from Mall)
Online ECU Programming: Easily reprogram ECU modules on 30 vehicle brands.
3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.
Topology Mapping: Visually show you all system relationships and DTC in color topology.
OBD PIN Detection: Detect the vehicle protocols and OBDII pin voltage status to help technicians judge the OBD2 interface.
Diagnostic Plan: Provides a plan to guide you on how to repair based on the currently detected fault codes.
User Information: A large amount of diagnostic data is well stored in this module, including Reports, Order, Live Data Stream, etc.

View more about PAD VII Elite >>>>>>>>>

Buy Launch X431 PAD V and PAD VII Heavy Duty Truck Software License Get Free Adapters Set

Launch X431 PAD VII/ PAD V not only do gasoline cars but also diesel heavy-duty trucks, The package includes full set of truck adapters and 1 Year Heavy Duty Truck Software License for Launch X431 PAD VII/PAD V

Features:

1. Launch X431 PAD VII/ PAD V not only supports gasoline cars but also diesel heavy-duty trucks. Heavy duty license needs to be purchased separately.
2. Buy License Get Free Adapter Set
3. Optional heavy duty truck software license and adapters for PAD V,  PAD VII and X431 PRO5.

HOW TO ACTIVATE HEAVY DUTY LICENSE?

1. After purchase software, please send your serial number to Sales@x431tool.com, we will provide you update password.
2. Go to Local Diagnose – Store– Commercial Vehicle (HD) software activation/ renewal- Subscription Renewal Card
3. X431 PAD will ask to submit a 24-digit renew card pin code, Put The 24-digit pin we sent you.
4. Manually enter pin code and submit
5. Activation done. Software will expire 1 year from now

What You Will Get?

1. 1 Year Heavy Duty Truck Software License (Online activation)
2. 1 set adapters for Heavy Duty Trucks

Package list:

1set xFull set Launch X431 Pad VII Elite
1set xFull set Launch Heavy Duty License Get Free Adapter Set

Launch X431 PROS V5.0 is the upgrade of Launch X431 PROS V1.0, which is a new generation of 8-inch automotive intelligent diagnostic equipment with good hardware and super performance, which covers 98% of the market. With Launch X431 GIII X-PROG 3 can perform excellent key and chip programming functions. Launch X431 GIII X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicles.

Launch X431 PROS V5.0 Feature:

1. New diagnostic VCI for DBSCar VII supports more communication protocols,such as CAN, CANFD, DoIP*, etc.
2. Wireless communication offers flexible and easy connections for diagnostics, A cabled connection offers a fast stable connection for advanced work like coding
3. Full system vehicle coverage for U.S., Asian and Europen markets over 110 brands, The vehicle coverage is continuously updating to cover more
4. Full diagnostic functionality includes comprehensive OBDII diagno stics, read/clear DTCs, bi-directional control, remote diagnosis, live data streaming, coding, etc
5. Review the previous diagnostic reports by tapping the menu of the Diagnostic History
6. One-step info Center includes vehicle repair information and the latest updates
7. Built-in repair information and training videos help to track and fix issues fast
8. Optional ADAS calibration function increases more revenue

Click here to get more info about Launch X431 PROS V5.0=============>

With Launch X431 GIII X-PROG 3: Add, delete, and reprogram keys; rewrite smart keys; replace key ECU.
The IMMO LICENSE please check here. (Xprog-3 is not for keys, it is mainly for cloning data. IMMO software is required for key programming.)

Launch X431 GIII X-PROG 3 Highlights:

1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V4.0, etc
4. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
5. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
6. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
Specifications:

Package List: 

1pc x Main Unit LAUNCH X431 PROS V5.0
1 set x OBD1 Cables and adapters
1 set x Launch X-PROG 3