Launch CR HD V2 Truck Scanner:
LAUNCH CR HD V2 is a new generation heavy-duty truck tool, developed based on the ARM platform and designed specifically for DIY users. This product supports HD OBD and EOBD, and features practical functions such as fast fault code reading and clearing, real-time data stream display, graphical display, voltage detection, data printing, and I/M readiness status checking, meeting the needs of various scenarios including daily maintenance and troubleshooting.
LAUNCH CR HD V2 supports J1708, J1939, J1979, J1850, PWM, and VPW protocols. It offers comprehensive fault code and data stream display and offers permanent free upgrades.

Launch CR HD V2 Functions:

Diagnose (Passenger Vehicle OBD Diagnostics)
Supports mainstream global automotive communication protocols, with no compatibility concerns.
HD OBD (Heavy Truck OBD Diagnostics)

Dual-Mode Intelligent Diagnostics
Automatic System Search: Automatically identifies vehicle communication protocols with a single click, quickly establishing a connection for high efficiency and convenience.
Manual System Selection: Supports professional personnel manually specifying the system to handle special or complex vehicle models, providing more accurate and flexible diagnosis.

Battery (Battery Check)
Read battery voltage from OBD port

Lookup (Fault Code Lookup) One-click accurate diagnosis, fault code lookup
1. Enter the fault code → 2. Adjust the characters according to the prompts → 3. Press [OK] to confirm the lookup

Help
OBD related definitions; Data flow terminology definitions; I/M readiness state terminology definitions; Viewing recorded data.

Setup
Language Switching: Supports three multilingual interfaces to meet the native language operation needs of users in different regions.
Unit of Measure: Allows for flexible unit settings to ensure data reading conforms to user habits.
Record mode: One-click enabling and disabling of recording mode.

Info (Device Information)
Software Version: The software version currently installed on the device.
Diagnostic Version: The firmware version currently installed on the device.
Serial Number
Register Code
Supported: Official Support Channels


Launch CR HD V2 Scanner Specifications:
Screen: 2.8 inch
Storage: 16MB
Interfaces: 1. OBDII (direct output); 2. Type-C
Voltage: 24V
Operating Current: 0.25A
Operating Temperature: 0℃~-50℃
Storage Temperature: -20℃~-70℃
Buttons: Up, Down, Left, Right, Confirm, Back, I/M
Certifications: CE, FCC, IC, RoHS
Languages: English, French, Spanish
Service: Upgrade package obtained via PC client connection, permanently valid.

Vehicle Diagnostic Interface Working Diagram

Quick Connection and Diagnostic Operation Steps

1. Connection Steps

• First, turn off the ignition switch and ensure the vehicle is in a safe state;

• Next, locate the DLC (Data Connector) – usually located under the steering wheel or on the driver’s side dashboard;

• Next, select and install the appropriate adapter according to the vehicle’s DLC type;

• Then, connect the diagnostic cable to the vehicle’s DLC via the adapter;

• Finally, turn on the ignition switch (the engine can be off or running) and start the diagnostic system.

2. Diagnostic Operation

Connecting the Device: Connect the diagnostic tool to the vehicle’s DLC, turn on the ignition switch, and the device will start automatically;

Entering the Main Interface: After the system recognizes the vehicle, it will enter the main function screen;

Selecting a Function: Select fault code lookup, data logging, playback, or auxiliary functions as needed;

Following the Prompts: Follow the on-screen instructions to complete the test; simple and efficient.

Package includes:
1pc x Main unit with diagnostic cables (3-row DB15 female connectors (1.5m cable))
1pc x OBD6 connector,
1pc x OBD9 connector,
1pc x CT9 connector,
1pc x adapter connector
1pc x USB power cable
1pc x Quick Start Guide
1pc x Cloth bag

Diagram of LAUNCH X-431 24V CAN adapter expansion module (SO816)  Connecting the LAUNCH DBScar Trailer-16 7 7 diagnostic connector (SO817) with a LAUNCH trailer diagnostic device supporting TEBS-E diagnostic software.

Package includes:

1pc x LAUNCH X-431 24V CAN Adapter Extension Module

LAUNCH X-431 SmartLink C HD LITE Heavy Duty Module work with Launch X431 8 inch Scanner PROS V5.0/PRO V 5.0/PRO TT/PRO Dyno.
It let transmission speed is faster and more stable, and the visual operation interface makes it more convenient.
For 8-inch units, serial number beginning with 98877.

X-431 SmartLink C HD LITE Heavy Duty Module Features:

Dual-processor Cortex-A7 Cortex-M7
8GB RAM 256MB storage
320×480 resolution display
Multiple connectivity options: Bluetooth, Wi-Fi, USB
Compatible with X-431 PRO series (8-inch tablet): PROS V5.0/ PRO V 5.0/ PRO TT/ PRO Dyno
Full-system diagnostics: Read/Clear DTCs, Read Data Streams, Special Functions, Actuation Tests.
Heavy-Duty Software Coverage
Engine Systems: Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai, etc.
Vehicle Types: Trucks, Buses, Construction machinery, Natural gas vehicles

X-431 SmartLink C HD LITE Support list:

VIN self-recognition
Mercedes-Benz
Hino
Neoplan
Wilburco
Cummins
Bosch Diesel
Hyundai
OBD(HD) Western Star
Dachai
Case
Wanguo
PAKA
Xichai
Duff
Caterpillar
Issa Bus
Peterbilt
Yangchai
Delphi
Asahi
Elisal
Quanchai
ZF
Dongfeng Commercial Vehicle
Credo
Isuzu/Chongqing Isuzu
Renault
JAC Commercial Vehicle
FAW Jiefang
Iveco
Aftertreatment Systems
Mark
Foton Commercial Vehicle
Detroit
Jezebel
Setra
Perkins
Heavy Duty ABS
Deutz
John Deere
Setel
Scania
ACE Machinery
Doosan
Kenworth
Sterling
Shaanxi Automobile
Aisin
Eaton
MAN
Steyr
Shangchai
Allison
Erf
Maxfair
Tata
China National Heavy Duty Truck
Asho Krelander
Slankers
Miller
Voith
Nissan (UD)
Commercial Vehicle One-Touch Entry System
Freightliner
MWM Volvo
Weichai
Pentax ABS
Fuso
Natural Gas
Volvo Construction Machinery
Yuchai

Specifications of X-431 SmartLink V2(SmartLink C HD LITE)：

CPU: Dual-processor Cortex-A7 Cortex-M7
Operating system: Linux
Resolutions: 320×480
Power< 6w
Storage: 8GB
Memory: 256M
Working temperature: 0℃~50℃
Working voltage: 9V DC—36V DC
Size: 200mm×110mm×47mm
Communications: WIFI/Bluetooth/Ethernet

Package includes:

1pc x X-431 SmartLink V2
1pc x  HD15F to OBDII 16-pin Male Integrated Test Adapter, RoHS
1pc x DB15F to HD15F Test Main Cable (with HD15M to OBDII 16-pin Male Integrated Adapter), RoHS
1pc x X431 PAD4HD USB Type-A to Type-B Cable, RoHS
1pc x X-431 SmartLink C HD Overseas Online Heavy-Duty Module Multilingual Quick Start Guide, RoHS
1pc x Universal Password Envelope (Non-LAUNCH Branded), RoHS
1pc x X431 PAD4HD B15M-Type II OBD-9 Integrated Diagnostic Adapter (Type II OBD 9)
1pc x X431 PAD4HD B15M-6 Integrated Diagnostic Adapter (OBD 6)
1pc x DIY HDB15M-CAT-9 Caterpillar 9-pin Integrated Diagnostic Adapter (CT 9), RoHS
1pc x X431 PAD4HD B15M-VOLVO-8/Volvo 8-pin Integrated Diagnostic Adapter (VO 8)
1pc x X431 PAD4HD B15M-16 Integrated Diagnostic Adapter (OBD 16)
1pc x X431 PAD4HD B15M-JUMPER-10 Heavy-Duty Jumper 10-pin Diagnostic Adapter (JUMPER 10)
1pc x Dual-Clamp Power Cable (English Version, Non-LAUNCH Branded), RoHS
4pcs x Fuse, AC250V/5A, φ5×20mm, ROHS
4pcs  x X-431 PAD IV Electronic Control Adapter Cable 1, RoHS
4pcs  x X-431 PAD IV Electronic Control Adapter Cable 6, RoHS
4pcs  x X-431 PAD IV Electronic Control Adapter Cable 7, RoHS
4pcs  x X-431 PAD IV Electronic Control Adapter Cable 8, RoHS

Launch X431 PAD VII, PAD V, X431 PRO5, PRO3 V Elite/ PRO3S Elite not only do gasoline cars but also diesel heavy-duty trucks.

– If you would like the Launch X431 Heavy Duty Trucks Software license only, please check here>>>>>>>>>>>>
– If you would like the Launch X431 Heavy Duty Trucks License with Adapter Set together, please check here>>>>>>>>>>

Features:

1. Launch X431 PAD VII, PAD V, X431 PRO5, PRO3 V Elite/ PRO3S Elite not only supports gasoline cars but also diesel heavy-duty trucks, which can expanded the HD module. Heavy duty license needs to be purchased separately.
2. Full Adapter Set
3. Optional heavy-duty truck software license and adapters for PAD V,  PAD VII, X431 PRO5, PRO3 V Elite/ PRO3S Elite.

What You Will Get?

1 set adapters for Heavy Duty Trucks

LAUNCH X431 V SmartLink HD diagnostic tool is suitable for Customers who mainly repair trucks /Diesel vehicles /machinery / Commercial Vehicles. ‎LAUNCH X431 V SmartLink HD includes software Truck, Trailer, Bus, Construction Machinery, Agricultural Machinery, Vessel, Commercial vehicles. Which is the updated version of: LAUNCH X431 V with HD III Heavy Duty Module

Launch X-431 V with SmartLink C V2.0 (New HDIII) HD Features:

• Android 10.0 system
• Designed with a bracket for easy lifting and hanging
• 2 Ghz 4-core high-efficiency processor, 4GB RAM 64GB ROM large storage, 10.1 inch 1280*800 touchable display.
• It is equipped with a high-endurance battery to run faster, more stably, and last longer.
• Powerful hardware upgrade; Industrial grade anti-fall design; Strong battery life 6300mAh,7.6V.
• Comes with standard new SmartLink C V2.0 connector makes the diagnostic function more powerful. Support Super remote function.
• Supports system-wide fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action testing.
• X-431 V SmarLink HD covers engine diagnostic software for Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engines. It supports software for trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicles.
• The SmartLink C 2.0 is more powerful and it is configured for passenger and commercial vehicles, mainly supporting commercial vehicles. The transmission speed is faster and the transmission is more stable; the visual operation interface makes it more convenient; it supports commercial vehicles, passenger cars, new energy and other models; it supports super remote diagnosis.

Launch X-431 V SmartLink HD Main Functions

Including intelligent diagnosis, traditional diagnosis, remote diagnosis, special functions, ADAS, testable models, information center, upgrade center, mall, and more functions. More pages include personal center, diagnostic records, diagnostic feedback, product manuals, FAQs, and toolboxes.

Remote diagnosis
Super remote diagnosis is based on SmartLink C-side diagnostic box and vehicle link. Maintenance technicians can use X431 diagnostic equipment, original equipment or other third-party brand equipment to remotely detect, diagnose and program the vehicle through the Launch server platform. This feature requires purchasing a point card to use.

Intelligent diagnosis
Adopts modular design to reduce redundant scanning steps and make diagnosis more accurate and efficient.

Traditional diagnosis

The diagnostic software in the traditional diagnostic function is classified by brand and vehicle type to solve the problem of menu confusion in the past. Technicians can quickly select the required diagnostic software through different menus to improve work efficiency.

Read data stream
Supports diverse data stream display modes and user-defined standard data streams.

ADAS
Commercial vehicle ADAS calibration function, product introduction, product manual, adjustment steps, vehicle model coverage and other document functions.

​

Special function

It supports 6 special functions commonly used in most car models, such as DPF, parameter setting, cylinder cutoff test, maintenance reset, injector programming, speed limit adjustment, etc., and is continuously updated.

Support Car List

V SmarLink HD Car Support List:

1 CUMMINS
2 DACHAI
3 DAF
4 DELPHI
5 DENSO_DIESEL
6 DFL
7 DS_MITSUBISHI
8 DS_NISSAN
9 DS_TOYOTA
10 DS_USAFORD
11 FAWJIEFANG
12 FOTONAUMAN
13 HD_ABS
14 HD_AISIN
15 HD_ALLISON
16 HD_ASHOK_LEYLAND
17 HD_ASTRA
18 HD_AUTOSEARCH
19 HD_BENDIX_ABS
20 HD_BENZ
21 HD_BHARATBENZ
22 HD_BONLUCK
23 HD_BOSCH
24 HD_BREMACH
25 HD_CASE
26 HD_CATERPILLAR
27 HD_CHAOCHAI
28 HD_CREDO
29 HD_DEMO
30 HD_DETROIT
31 HD_DEUTZ
32 HD_DOOSAN
33 HD_EATON
34 HD_EICHER
35 HD_ERF
36 HD_FLEXICOIL(Flexi-Coil)
37 HD_FREIGHTLINER
38 HD_FUSO
39 HD_GOLDENDRAGON
40 HD_HALDEX_ABS
41 HD_HIGER
42 HD_HINO
43 HD_HYUNDAI
44 HD_INTERNATIONAL
45 HD_IRISBUS
46 HD_IRIZAR
47 HD_ISUZU
48 HD_IVECO
49 HD_JCB
50 HD_JMC
51 HD_JOHNDEERE
52 HD_KENWORTH
53 HD_KINGLONG
54 HD_KNORR
55 HD_MACHINERY
56 HD_MAHINDRA
57 HD_MAN
58 HD_MAXXFORCE
59 HD_MILLER
60 HD_MWM(MWM)
61 HD_NATURE
62 HD_NEOPLAN
63 HD_NEWHOLLAND
64 HD_OBD(OBD)
65 HD_PACCAR
66 HD_PETERBILT
67 HD_PSI(PSI)
68 HD_QUANCHAITY
69 HD_RENAULT
70 HD_SCR
71 HD_SETRA
72 HD_SITCAR
73 HD_STERLING
74 HD_STEYR
75 HD_SUNLONG
76 HD_SUNWIN
77 HD_TATA
78 HD_TRAILER
79 HD_VOITH
80 HD_VOLVO
81 HD_VOLVO_CE
82 HD_WABCO_ABS
83 HD_WESTERN_STAR
84 HD_XICHAI
85 HD_YANGCHAI
86 HD_YUFENG
87 HD_ZF
88 HD_ZHONGTONG
89 JAC_HD
90 KOBELCO
91 MACK
92 PERKINS
93 SCANIA
94 SHACMAN
95 SHANGCHAI
96 SINOTRUK
97 UD
98 WP_DIESEL
99 YUCHAI
100 YUTONG

Launch X-431 V SmartLink HD Parameters:

Processor 2.0GHz 4 core
Operating system Android 10.0
Memory 4GB
Storage 64GB
Battery 47880mWh (7.6 V, 6300mAh)
Display 10.1 inches 1280*800
Camera rear 8 million pixels
WIFI 2.4GHz/5GHz (dual band)
Interface TYPE A *1 &TYPE C*1
Working temperature 0~50℃
Size 274*190.5*40.5mm

SmartLink C 2.0 Parameters:

CPU dual processor Cortex-A7 Cortex-M7
Operating system Linux
Resolution 320×480
Power consumption < 6w
Storage 8GB
Memory 256M
Working temperature 0℃~50℃
Working voltage 9V DC—36V DC
Dimensions: 200mm×110mm×47mm
Communication method WIFI/Bluetooth/Ethernet

Package Includes:

1pc x Launch X-431 V SmartLink HD tablet
1pc x SmartLink C 2.0 connector
1pc x Type II OBD-9 connector
1pc x IVECO 36 connector
1pc x OBD16 connector
1pc x OBD 6 connector
1pc x CAT 9 connector
1pc x BENZ 14 connector
1pc x RENAULT 12 connector
1pc x VOLVO 8 connector
1pc x MAN 37 connector
1pc x MAN 12 connector
1pc x IVECO 38 connector
1pc x ISUZU 20 connector
1pc x Jumpers
1pc x Test cable
1pc x OBD main cable
1pc x Power cable clips
1pc x Lighter
1pc x Jumper 10
1pc x HY-16 cable
1pc x M/F 12 16 cable
2pcs x USB cables
1pc x Standard power adapter
6pcs x Fuses
2pcs x Boxes
1pc x User manual
1pc x Password letter
9pcs x Jumpers

LAUNCH X431 PRO3S SmartLink HD for 12V&24V Diesel&Gasoline Support Bi-Directional Scan Tool, ECU Coding, Support CANFD &DOIP, J2534 Programming

LAUNCH X431 PRO3S SmartLink HD is upgraded of LAUNCH X431 PRO3S HDIII, ranks No.1 in vehicle coverage. It can work for cars/trucks/buses/trailers/excavators/diesel engine/construction machinery/pick-up, etc.

Launch X431 Pro3s Smartlink HD Highlights:

1. The tablet has a higher version system, larger storage, and longer battery life, making diagnosis faster, more stable, and more durable.
2. Supports Topology Mapping diagnosis
3. Supports EV diagnostic kit (NEW)
4. Support 12V & 24V diesel gasoline cars and trucks
5. With Smartlink C 2.0 truck module, supports, J2534, CAN FD and DoIP protocol
6. With 8-core qualcomm-snapdragon processor
7. ALL-System ALL-Function Diagnostics Full Bi-directional Control ((Active Test))
8. Supports ECU Coding & Online Coding & Key Programming
9. Wide car model coverage, strong diagnostic function, supports full system diagnosis of all supported car models
10. Support VIN code automatic identification function to quickly enter diagnosis
11. Supports reading version information, code reading, code clearing, reading data stream, action testing, coding, matching, etc.
12. Supports VAG Guided Function for compatible with VW, AUDI, SKODA, SEAT (Step-by-Step Guide)
13. Supports Auto auth for FCA/SGW
14. 12-in-1 Live Data Monitor in Graphic, Autoscan
15. Multiple expansion modules support: endoscope, BST-360, oscilloscope, sensor, wifi printer, TPMS, X-prog3, remote generator etc
16. Supports 60 special functions such as maintenance light reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset, etc.
17. Work with HDIII Heavy Duty to Test 24V Truck.(need extra truck module). It not only supports passenger car diagnosis but also supports commercial vehicle expansion.
18. 2 Years Free Software Subscription. later 1 year subscription is $899 (for both car and trucks)
19. Multi-language Supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Simplified Chinese, Traditional Chinese.

Notice:

Global Version for Customers outside the UK and EU countries
UK/EU Version for UK/EU Countries customers

Launch X431 Pro3s Smartlink HD Functions:New CAN FD & DoIP Protocol Supporting (NO Need Adapter)

LAUNCH scanners are always connected with the needs of their customers.2024 Upgraded version of LAUNCH X431PRO3S Smartlink HD introduces new protocols CAN FD & DoIP to the vehicle diagnostic process for enhancing vehicle diagnostic speed and vehicle communication rate.

CAN FD standard in LAUNCH X431PRO3S Smartlink HD increases bit rate of up to 4 Mbit/s during payload transmission and processes greater quantities of diagnostic data, and saves both time and costs. compatible with GM Models including Onix 2020-2024, Tracker 2020-2024, Suburban 2021-2024, Tahoe 2021-2024, Montana 2024, Silverado 2024, Electra E5 2024, Escalade 2021-2024, Escalade ESV 2021-2024, Sierra 2024, Yukon 2021-202.2/2024, Yukon XL 2021-202.2/2024, and Chrysler Models including Grand Cherokee(WL) 2021-202.3, Grand Wagoneer 2022-2024.

DoIP allows your LAUNCH X431PRO3S Smartlink HD scanner to run a 100Mbit/s ultra-faster data transfer rates at a low hardware cost and achieve remote vehicle diagnostics capabilities in all ECUs connected to it. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).

FCA Secure Gateway

LAUNCH X431 PRO3S SMARTLINK HD 2.0 automotive diagnostic scanner provides a trustworthy authority for technicians, car dealers, automotive engineers, and service shops to undo the SGW and perform all the necessary repair procedures.

Intuitive Topology Mapping

-Display each module’s status and the number of DTCs in one page
-Show real communication structure of all ECU module, easy to understand wiring schematics for cars
-Tap to enter the systems or modules with fault codes
-Zooming in and out to check the color coded modules

Visualizes the car systems with a diagrammatic tree, shows the system normal,faulty and not equipped by diagnosing the whole system.
Intuitive Use Topology Mapping show the structure of communication between modules,and checks all system conditions with One-Click
Locate the fault in a second show different health status in different colors

ADAS Calibration: Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
FCA AUTOAUTH :With the new version on LAUNCH X431 PRO3S SMARTLINK HD 2.0 , you will have access to the security gateway module on 2017 and newer Fiat/ Chrysler/ Dodge/ Jeep vehicles(2017-2024), so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns, ADAS calibration assistance etc.
DTC Help & Google Search: Just one click “DTC Help”or Code Search”after the DTC shows, save time by putting one by one.
12-In-1 Live Data Stream Graphing&Export Data as CSV/PDF File: Provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it,CSV/PDF file allow you save the data,easy to record and track the vehicle performance.
Tons of Online Maintenance Resources: Including How-to Videos, operation skills, DTC Guidances, and user manual, Q&A, Quick start guide, etc,show you how to use diagnostic tool to solve common faults of some models, such as resetting BMW brake warning lights.
Remote Diagnosis &Feedback: When you encounter a complex car issue that is beyond your ability, you can easily get connected with an expert who is NOT physically present to help you fix it by using “Remote Diagnosis”. And if you have some difficulties or find some bugs during the use of this scan tool, you can send “Feedback” messages to LAUNCH technicians. They will handle the issues promptly.
Diagnostic Report Print&Share: With Launch X431 PRO3S SMARTLINK HD,you can generate a full system Diagnostic Report by ONE-CLICK. The reports can be emailed to the office or directly to your customer. You can also print out the vehicle health report card.
(PMI) Programmable Module Installation : LAUNCH X431 PRO3S SMARTLINK HD 2.0 Support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription
V.A.G Guided Functions for Audi, Volkswagen Skoda and Seat,etc : On-Screen Instruction step by step , LAUNCH X431 PRO3S SMARTLINK HD 2.0 Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function , you don’t need to reply on a mechanic’s suggestion all the time.
Auto VIN Scan: 5 Ways for quick diagnose included 1)AUTO -VIN SCAN 2)CAMERA VIN 3)Manually Input VIN 4)Select Area and Vehicle- Automatic Detection 5)Select Area and Vehicle- Manual Selection

ECU CODING: Online Coding/Matching/Calibration/Relearn/Personalization/Retrofit/Customization

With ECU coding functions, LAUNCH X431 PRO3S Smartlink HD will improve vehicle performance, customize individual customization, refresh hidden functions, disable the annoying functions, reprograms the adaptive data for certain components after repairs or replacements, customized configurations for high-end models,etc to enhance fuel efficiency and ensure safe driving.

Online Coding: this LAUNCH scan tool can directly access the online vehicle repair data to do high-level repairs.

Offline Coding: read the code from the original module, and then write the code for the new module,for example ,write a VIN to new ECU.

Component Matching:Matching,relearn ,Cali-b-ration, or initia-lization adaptive data for certain components after repair or replacements,such as: suspension cali-bration ,seat matching ,sunroof initia-lization,gearbox matching,injector cali-bration, transmission adap-tion.Delete Adapt-ation Data, Tank Cali-b-ration,Height sensor system cali-bration,PSM Sensor Cali-b-ration ,etc.

Re-trofit/Modi-fication: for example, re-trofit battery with different type, Upgrading the headlights, taillights, and interior lighting to LED lights,etc.

Unlock the hidden features:for example,disable auto start-stop, disable daytime running light, disable safety belt chiming ,delete transport mode,delete transmission adaptive value.setting speed limits,etc.

J2534 Programming: Pairing with the SmartLink C V2.0 device (serving as J2534-Compliant VCI), you can operate a PC or LAUNCH X431 PRO3S SmartLink C diagnostic tool to download OEM software and install J2534 files from LAUNCH official website, to perform the J2534 programming for some vehicles. Note: Reach us to get the J2534 Operation manual.

What can this J2534 Programming Function do for you?
(1) Operate OEM programming without using the OEM tools
(2) Replace ECUs: program blank ECUs
(3) Write-in Data: refresh used ECUs
(4) Repair missing ECU information(5) Upgrade ECU software version

Audi /VW Firmware Protection Cancel Features:One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications.

(PMI) Pro-grammable Module Installation:Support PMI function,Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initia-lize a module.No need using the J2534 or buying a subscription.

Bi-directional Control: ( ACTIVE TEST )

–For cars :Injector Buzz Test/Idle Speed Adjustment/Window/Mirror/Door Lock test/Pump and Valve tests/Fuel Pump/Solenoid valve ,tank Ventilation/Switch/cylinder correction off/on/E.GR test/EVAP test/A/C Compressor Activation/Turn on the radiator fan/Modulate the throttle/cycling the a/c/clutch on and off/Acceleration Device Test,etc .(vary by car model,year)

–For Heavy duty Trucks: Cylinder cut-out test/compression test/injector volume commands/injector programming/S.CR commands/rail high pressure test/S.CR catalyst regen/Cylinder balance test/D.PF regen/VGT calibrations/S.CR commands/Aftertreatment reset/Parameter changing/glow relay activation check/reset the D.P.F filter,etc.(vary by car model,year)

Power balance Test : Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem. **All above are not available for some specific car models. Reach us for details.

60 Kinds of Maintenance Functions (Vary By Car Model ,Year)

1.Oil Lamp Reset Service:perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Reset:Help replace and reset the brake pad.
3.BAT battery service(BMS):Clear the fault information of low battery and make it match again
4.D.P.F service
5. SAS Steering Angel Sensor Reset:Reset the steering angle to zero to keep the car running straight.
6. ABS Bleeding: Help exhaust the air.
7. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.
8. TPMS service: Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.
9. Throttle Adaptation: Initialize the throttle actuators to the default state.
10. AFS Headlamp Reset: Initialize the adaptive headlamp system.
11. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
12. Suspension Reset:Adjust the vehicle body height sensor for level calibration.
13. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.
14. Gear Learning: Monitors certain camshaft position sensors signals.
15.Tire Reset:Set the size parameters of the modified or replaced tire.
16.A/F Reset:Set or learn Air/Fuel ratio parameters.
17.Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
18.Coolant Bleeding:Activate the electronic water pump.
19.Language Change:Change vehicle system language.
20.Nox Sensor Reset:Reset catalytic converter learned value stored in ECU.
21.Stop/Start Reset:Set up the automatic start-stop function in ECU
22.Seat Calibration:Calibrate the memory in replaced or repaired seats.
23.Transport Mode:Deactivate the transport mode.
24.Windows Calibration:Perform door window matching to recover ECU initial memory.
25.AC System Relearn/Initialization.
26.E.GR Reset.
27.Reset Fuel Trim .
28.Reset Fuel Alcohol Level.
29.High Voltage Battery Diagnostics.
30.GPF Regeneration.
31.Camshaft/Crankshaft Sensor Relearn
32. Interactive Vehicle Dynamics (IVD) Initialization Sequence.
33.Fuel Economy Test
34.Halt/Resume Transmission Adaptive Learning.
35.Passive Anti Theft System(PATS)Functions.
36.Relearn Vehicle Data.38.Initialisation Of Automatic Tailgate .
37. Initialise Power Window Regulators;
38. Seat Standardisation
39.Normalise Slide/ Tilt Sunroof;
40.Activate Contactless Vehicle Access
41.Power-Down Command
42.Autoaddressing Ambient Light BDC.
43.Unlocking Auxiliary Heater
44.Drain/ Fill The Refrigerant Circuit
45.Installation Position Of Flap Motors ;
46.ETS Test Of Lithium lon Battery;
47.Register Battery Exchange
48.Reset Adaptation Values
49.Adjusting The Electromotive Throttle Controller;
50.Injection Quantity Compensation;
51.Open And Close Radiator Blind;
52.Activate/Deactivate Workshop Mode ;
53.Start-Up For Brake Pedal Travel Sensor .etc.
….

Q: Why do i only see 37 service functions on my tablet, when its advertised 60 service functions ?

A: Actually, you can “quick access” to 37 most commonly used special functions under the main menu “service functions”, but the listed commonly used special functions below this menu is obviously NOT ALL special functions you will get from our LAUNCH X431 PRO3S SMARTLINK HD. YES , You can get 60 for free as we advertised !! (some car models up to 300 Special functions (Calibration,relearn, adaption ,initialization,retrofit )

Q: If so , How can I locate the 60 or even more special functions ?

A: you can locate more than 60 reset functions (special functions) under module/system after you access to your vehicle software . And it’s completely free to use permanently.

Expandied Functions:

1. X431 VSP-600 Videoscope (For inspection of hidden and narrow parts of the engine, fuel tank, brake system, etc.)
2. X431 TSGUN (You can use it not only to activate the sensor ID, tire pressure, sensor frequency, tire temperature and battery status; you can also program sensor data to a blank LAUNCH branded sensor in three ways: automatically, manually and by activating a copy; at the same time, you can write the newly programmed sensor ID to the vehicle ECU.)
3. X431 X-PROG 3 (IMMO For V.A.G Group Above 3.5,advanced immobilizer and key programmer) Vehicles that require a clone key are not compatible with this accessory.
4. X431 Heavy Duty Module -LAUNCH HDIII or SmartLink HD 2.0 add-on module is an essential truck module which can turn your X431 scan tools into full function heavy duty truck diagnostic tools,working on both heavy-duty(Class 4 through 8) and medium-duty trucks(Such as heavy trucks, city buses, bulldozers, excavators, etc.)
5. X431 ADAS Mobile/ADAS PRO -Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
6. X431 WiFi Printer (Print out diagnostic data/ reports.)
7.X431 BST360 battery test (For Battery Cranking system Test, Battery Charging system Test, Battery Health Test)
8. EV diagnostic kit: New Energy Battery Pack perform battery pack analysis
9. IMMO Software Package: advanced immo key programming with x-prog3
10.S2-2 Multimeter
11.S2-2 Sensorbox

Launch X431 PAD VII/ PAD V and X431 PRO5not only do gasoline cars but also diesel heavy-duty trucks, The package includes full set of truck adapters and 1 Year Heavy Duty Truck Software License for Launch X431 PAD VII/PAD V

Features:

1. Launch X431 PAD VII/ PAD V not only supports gasoline cars but also diesel heavy-duty trucks. Heavy duty license needs to be purchased separately.
2. Buy a License Get a Free Adapter Set
3. Optional heavy-duty truck software license and adapters for PAD V,  PAD VII and X431 PRO5.
4. After 1 year, you can choose this update service.

HOW TO ACTIVATE HEAVY DUTY LICENSE?

1. After purchase software, please send your serial number to Sales@x431tool.com, we will provide you update password.
2. Go to Local Diagnose – Store– Commercial Vehicle (HD) software activation/ renewal- Subscription Renewal Card
3. X431 PAD will ask to submit a 24-digit renew card pin code, Put The 24-digit pin we sent you.
4. Manually enter pin code and submit
5. Activation done. Software will expire 1 year from now

What You Will Get?

1. 1 Year Heavy Duty Truck Software License (Online activation)
2. 1 set adapters for Heavy Duty Trucks

Launch X-431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7 Cortex-M7, 8G storage, 256M storage, 320*480 resolution. It supports Bluetooth, Wi-Fi, USB and other communication methods, and can be used with X431 V , X-431 PRO3S and X431 PRO3 APEX series.

It also support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test. Covering Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.

Launch X431 SmartLink C V2.0 Bullet Points:

1. Launch X-431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7 Cortex-M7, 8G storage, 256M storage, 320*480 resolution.
2. Update Version of Launch X431 HDIII: The transmission speed is faster and more stable, and the visual operation interface makes it more convenient.
3. Support Bluetooth, Wi-Fi, USB and other communication methods.
4. Can be used with Launch X431 V , X-431 PRO3S and X431 PRO5 series.
5. Support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test.
6. Support commercial vehicles, passenger vehicles, new energy and other models: Covering Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.
7. DO NOT SUPPORT super remote diagnosis. Please check here. USA, Canada, Mexico, Columbia, Australia, Brazil, Japan are not supported at the moment.
8. 1 year free update, the Annual Subscription cost is 549USD/year after free update service.

Note: LAUNCH X-431 HD SmartLink C 2.0 Module cannot be used alone. It only works with LAUNCH Tablet of Launch X431 V , X-431 PRO3S and X431 PRO5 series.

How to add the SmartLinkC V2.0 to my PAD?

1. Open the x431 tablet device and Enter the X431 app
2. Go to user info
3. Choosing to activate VCI
4. Enter SmartLink C V2.0 serial number and activation code
5. Then you can download the truck software

Functions Comparison Between LAUNCH X431 HDIII & Launch X-431 SmartLink C 2.0 

Launch Smartlink C Feature:

Work as a VCI (Vehicle Communication Interface)
Work as a Local J2534 PassThru Device
Work as a Remote J2534 PassThru Device

More details, please check Smartlink C User Manual

X-431 SmartLink C Specifications:

88 supported software list:

X431, JCB X431, Renault Heavy Vehicle X431, IRIZAR Heavy Vehicle X431, Zhongtong Bus (ZHONGTONG BUS) X431, USAFORD Diesel Version X431, AISIN Heavy Vehicle
X431, Yutong Bus X431, Foton Auman X431, IRISBUS Heavy Duty Truck X431, Kenworth Heavy Duty Truck X431, HD_TATA X431, VOITH Heavy Duty Truck
X431, Benz heavy truck X431, JAC heavy truck X431, CREDO heavy truck X431, Stirling heavy truck X431, Doosan engine X431 Perkins
X431, VOLVO Heavy Duty Truck X431, Freightliner Heavy Duty Truck X431, Dongfeng Commercial Vehicle X431, IWC Heavy Duty Truck X431, Peterbilt Heavy Duty Truck X431, DEUTZ
X431, Cummins engine X431, SCANIA X431, Chaochai X431, Xixing heavy-duty vehicle X431, WABCO ABS X431, ZF
X431, ISUZU Heavy Duty Vehicle X431, FUSO X431, Xichai X431, AutoSearch X431, Case X431, KNORR ABS
X431, IVECO Heavy Duty Vehicle X431, ASTRA X431, Quanchai X431, Dachai Heavy Duty Vehicle X431, Steyr X431, Miller
X431, special for Yuchai X431, BREMACH X-431, Dongfeng Yufeng X431, Golden Passenger Car X431, heavy-duty natural gas X431, HD_FLEXICOIL
X431, BOSCH X431, Hino X431, BONLUCK Bus X431, Higer Bus X431, DENSO_Diesel/Diesel Engine X431, Volvo Construction Machinery
X431, Shangchai X431, ERF X431, ALLISON gearbox X431, Ashok Leyland X431, DELPHI X431, MWM heavy duty vehicles
X431,DAF X431,UD Truck/Nissan Diesel X431,DETROIT Engine X431,Yang Diesel Engine X431,King Long Bus X431,Heavy Truck Demonstration Software
X431, FAW Jiefang X431, construction machinery X431, MACK heavy-duty vehicle X431, HD_ABS system X431, diesel version Mitsubishi X431, heavy-duty vehicle standard
X431, Hyundai Heavy Vehicle X431, SETRA Heavy Vehicle X431, WP Diesel Engine X431, Heavy Truck Aftertreatment System X431, Diesel Nissan X431, Commercial Vehicle One-key Scan
X431, Sinotruk X431, SITCAR heavy truck X431, Sunlong Bus (SUNLONG) X431, heavy truck Jiangling X431, diesel version Toyota
X431, MAN X431, NEOPLAN Heavy Duty Truck X431, Sunwin Bus (SUNWIN) X431, Caterpillar Heavy Duty Truck X431, TRAILER Heavy Duty Truck

Package Includes:

1pc x SmartLink C V2.0 Heavy Duty Module (maintenance end, 98934, no label)
1pc x HD15F to OBDII 16 male integrated test connector, RoHS
1pc x DB15F to HD15F test main line (without DC), L=1000mm, RoHS
1pc x Double clamp power cord (English, without LAUNCH), RoHS
1pc x Cigarette lighter cable (English, no LAUNCH), RoHS
4pcs x Fuse, AC250V/5A, φ5*20mm ROHS
2pcs x Fuse, AC250V/5A, φ6*30mm ROHS
1pc x X431 PAD4HD USB Type A to Type B Cable, RoHS
1pc x Category 6 Gigabit Network Cable (Blue) 15m, RoHS
1pc x SmartLinkC V2.0 Heavy Duty Truck Module Multilingual Quick Start, RoHS
1pc x X431 PAD4HDB15M-CAT-9/CAT 9PIN integrated diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-VOLVO-8/Volvo 8PIN integrated diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-16 Integral diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-Type II OBD-9 Integral Diagnostic Connector, RoHS
1pc x X431 PAD4HDB15M-6 Integral diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-JUMPER-10 heavy truck jumper 10PIN diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-IVECO-30/IVECO 30PIN Integrated Diagnostic Connector, RoHS
1pc x X431 PAD4HDB15M-IVECO-38/IVECO 38PIN Integrated Diagnostic Connector, RoHS
1pc x X431 PAD4HDB15M-MAN-12/Man 12PIN integrated diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-BENZ-14/Benz 14PIN integrated diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-MAN-37/Man 37PIN integrated diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-RENAULT-12/Reynolds 12PIN integrated diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-MITSUBISHI-12 16/FUSO 12 16PIN linear diagnostic connector, RoHS
1pc x X431 PAD4HDB15M-HYUNDAI-16/Hyundai truck 16PIN linear diagnostic connector, RoHS
4pcs x X-431 PAD IV electric control adapter cable 1, RoHS
4pcs x X-431 PAD IV electric control adapter cable 2, RoHS
4pcs x X-431 PAD IV electric control adapter cable 3, RoHS
4pcs x X-431 PAD IV electric control adapter cable 4, RoHS
4pcs x X-431 PAD IV electric control adapter cable 5, RoHS
4pcs x X-431 PAD IV electric control adapter cable 6, RoHS
4pcs x X-431 PAD IV electric control adapter cable 7, RoHS
4pcs x X-431 PAD IV electric control adapter cable 8, RoHS
4pcs x X-431 PAD IV electric control adapter cable 9, RoHS
1pc xUniversal password envelope (without LAUNCH), RoHS
1pc xSmartLinkC V2.0 Heavy Duty Truck Module Multilingual Quick Start, RoHS

LAUNCH CRP129 HD Highlights:

• Support All System diagnostic
• Android-based diagnostic tool for commercial vehicles repairing & diagnostics.
• Support 99% Truck Coverage. Wide range OE-level coverage for Asian, European and U.S. makes and models.
• The basic functions include read & clear DTC, live data graph, vehicle information look up, etc.
• Support diagnostic reports review, diagnostic record playback and other auxiliary functions.
• 7 advanced service functions include DPF Refen, Urea Drive(DEF), Oil Maintenance Reset, Injector Coding, Speed Limit Adjustment, Cylinder Deactivation Compression, Clutch Matching.
• 2 Years Free Update Online.
• Supports 11 Languages: English, French, Spanish, German, Korean, Japanese, Portuguese, Italian, Traditional Chinese, Russian, Polish

LAUNCH CRP129 HD Supports All system Diagnostic:

The Full Systems of the car mainly including Drive System, Chassis System, Body System, Electrical system :

1.PCM(Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more…

2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more…

3.BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone, and more…

4.Electrical System: Including Centralized control system for engine and power transmission, Chassis integrated control and safety system, Intelligent body electronic system, Communication and information / entertainment system.

It supports the detailed Function:

–read fault codes: read and decode the DTCs to identify where the fault location is;
–clear fault codes: erase the DTCs to turn off the MIL after repairs;
–retrieve ecu information: allows you to retrieve vehicle information;
–Graph live data stream: view the dynamic data stream to determine vehicle condition

With the Diagnose Function , you can enhance performance, save energy, reduce emissions and more as following:

For Engine: detect common issues as Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Damaged oxygen sensors, Aged spark plugs, etc.

For SRS: pinpoint the trouble area as: a bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.

For ABS: diagnose Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.

For Transmission: avoid Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears Slipping, Low or Leaking Transmission Fluid, etc.

For TPMS: verify problems of Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.

LAUNCH CRP129 HD Supports 7 Service:

( pls note different reset function supports different cars , also supports some cars , not for all cars , pls contact us check the detailed car list , you also can check in the link directly  : https://qcar.x431.com/qcar/#/pc/index?q=eyJsYW4iOiIxMDAyIn0%3D ）

1. DPF regeneration

This function can help remove PM (Particulate Matters) from the DPF filter by using combustion oxidation methods (such as high temperature heating combustion,  fuel additive or catalyst reduce PM ignition combustion) to keep the performance of the filter stable.

2. Oil reset

This function enables you to reset the oil service for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events.

3. Injector coding

This function can write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder, so as to control or correct the cylinder injection quantity accurately.

4. Speed limit reset

This function enables you to adjust or cancel the maximum vehicle speed limit
It needs to be performed in the following cases:
When engine is running abnormally or certain cylinder does not work.

5. Cylinder cut-off, compression test

This function can cut off certain cylinder when the engine is running to identify which one is working improperly. Users can judge whether certain cylinder is normal or not by separately cutting off certain cylinder and checking the working status of the engine.

6. Clutch learning

This function can relearn clutch values to ensure normal operation of the clutch .
It needs to be performed in the following cases :
• After programming TCU, replacing gearbox or TCU.

7. Urea drive (DEF)

This function can drive the urea pump to perform reverse pumping .

Wide Compatibility of D.P.F Regeneration with Engines

CRP129 HD ELITE heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks for class 3 and class 8,equipped with over 10 types engines,such as For CATERPILLAR, For CUMMINS, For DETROIT, For ISUZU, For PACCAR, For PERKINS, For VOLVO, For MAXXFORCE, For HINO, For DOOSAN…

For CUMMINS: X12/ X15/ ISX15/ L9/ ISB/ISD/ ISL/ ISG/ ISX/ ISF/ISBE/ QSM11/ISM/ QSX15/ISC/ ISN/ ISK…

For DETROIT: DD5/DD8/DD13/ DD15/ DD16/SERIES 50/ SERIES 60/MBE 900/ MBE 4000/CPC2/CPC02T/CPC04T/CPC302T 50/CPC302T 55/CPC302T 60/MBE900//MBE4000/OM502/OM501/DDDL6/DDDL7…

For ISUZU: 4HE1/ AHG1/ 4HK1/ 4HL1 /4HV1/ 4JA1 /4JB1/4JG2/4JH1/ 4JJ1/4JJ3 /4JK1/4KH1/4HE1/ 4HG1/ 4HJ1/ 4HK1/ 4HL1/4HV1/ 4JA1/ 4KH1 /4ZE1 /6HK1/ 6HL1/ 6U2Z/ 6WF1 /6WGt/RZ4E…

For VOLVO: J1708/500K/D13TC/D11/D13/FM Series(FM7/9/10/12)/ FH Series(FH12/16/565)/FL Series(FL10 FL12 FL6FL7)/NH Series(NH12/535/565)/ F Series(F10/12/16)…

For PACCAR: MX10/ MX13/TX-7/TX-8/PX-7/ PX-9/PR/ GR/ BR Series…

For MAXXFORCE: For MaxxForce5/7/11/13/15/DT9/DT10…

For CATERPILLAR: C7/ C9/ C11/C13/ C15/ C18/C27/ C32…

For FUSO: Euro 2/3/4/5/6( For Canter, For Fighter,Super great)…

There are more engine models not listed here,please reach us for the compatibility before purcahse.

LAUNCH CRP129 HD Supports Full obd function:

* Reading Codes: HD OBD diagnostic trouble codes are codes stored by the on-board computer diagnostic system in response to problems found in the v-ehicle. These codes identify specific problem areas and are designed to give you information on where a problem may be occurring within the vehicle.

* Erasing Codes & Reset: After repairing according to the prompts of the scanner, clear the fault codes.

* Live Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

* Freeze Frame: Get a snapshot of the vehicle (view the vehicle’s operating parameters) while storing the freeze frame code. For example, parameters may include engine speed (RPM), engine coolant temperature (ECT), or data recorded in the event of a vehicle speed sensor (VSS) emissions related failure, among others.

* Vehicle Information: The vehicle information function can retrieve the vehicle Identification Number (VIN), Calibration ID Number (CIN), Calibration Verification Number (CVN).

* EVAP System Test: Initiate a leak test for the vehicle’s EVAP system to determine the procedures necessary to stop the test.

* O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

* On-Board Monitor Test: Retrieves and displays test results for e-mission-related power train components and systems.Locate M isfire cylinder/Display Live misfirecounts…

* DTC Lookup Library: CR129 HD is equipped with 10000 fault code library with detailed explanations, you don’t need to go to the Internet to find the meaning of these fault codes, you can directly query them on the truck scanner.

* I/M Readines-s Status: Indicator to determine if all emissions components have been evaluated by the HD OBD system. They are conducting regular tests on specific systems and components to ensure they are operating within permissible limits. It’s an excellent feature to use before checking your vehicle’s compliance with state emissions p rograms.

Experience ultra conveneince with LAUNCH CRP129 HD now!

* One-Click Wifi Update:
No IP limited. Easier to upgrade, one-click WiFi update online,Upgrade the software anytime and anywhere !

* AUTO VIN Scan:
Straight forwardly get detailed info about the car, ranging from engine type to where it was manufactured. Then it offers full-system diagnosis and comprehensive codes after finishing scanning and detection.

* 4-in-1 Live Data Graphing:
Monitor real-time Live Data Stream displayed in text or graph; can be merged for easier view, and recorded or replayed for further analysis.

* Diagnostic History Function:
Once a vehicle diagnosis is performed, CRP129 HD will record the every detail of the diagnostic process.you can Record/Review/Playback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.

* Diagnostic Feeback:
CRP129 HD scan tool provides you with a Feedback function to share any problems you encounter in the process of diagnosis.We will make every effort to perform a no-delay problem solving and makes improvements on product quality according to your problems and suggestions, thus offering you a higher quality user experience.

* Remote Diagnosis:
When you encounter a complex car issue that is beyond your ability, you can easily get connected with an expert who is NOT physically present to help you fix it by using “Remote Diagnosis”. And if you have some difficulties or find some bugs during the use of this scan tool, you can send “Feedback” messages to LAUNCH technicians. They will handle the issues promptly.

* Diagnostic Report Sharing:
Elevating the essence of diagnostics, this remarkable tool CRP129HD seamlessly generates a comprehensive diagnostic report upon scan completion. This meticulously compiled report encapsulates intricate inspection results, ensuring both mechanics and customers are equipped with a holistic understanding of the vehicle’s health.

* DTC Help & Google Search: 
Just one click “DTC Help”or Code Search”after the DTC shows, save time by putting one by one.

LAUNCH CRP129 HD Supports HD OBD/EOBD Protocols:

It perform 10 MODE HD/EOBD full functions, compatible with almost all American HD trucks (Class3-Class8) that is compliant with the classic protocols J1939, J1708, J1587

LAUNCN CRP129 HD Supports Truck List:

This full system diesel diagnostic scanner can perform OE-level diagnosis and analysis on all available systems for more than 52 brands (10,000 models in American, Asian, European,1984-2024),Compatible with 12V & 24V diesel vehicles,for Trucks/Buses//RVS/Trailers/Excavators/Diesel/Pick-up/Agriculture,etc.

Supports Truck LIst:

AUTOSEARCH, For CUMMINS, For DAF, DS_For USAFORD, HD_For AISIN, HD_For ALLISON, HD_For ASHOK_For LEYLAND, HD_AUTOSEARCH, HD_For BENDIX_ABS, HD_ For BENZ, HD_For CASE, HD_For CATERPILLAR, HD_For CREDO, HD_DEMO, HD_For DETROIT, HD_For DEUTZ, HD_For DOOSAN, HD_For EATON, HD_ For ERF, HD_For FLEXICOIL, HD_For FREIGHTLINER, HD_For FUSO, HD_For HINO, HD_For HYUNDAI, HD_For INTERNATIONAL, HD_For IRISBUS, HD_For IRIZAR, HD_For ISUZU, HD_For IVECO, HD_For JCB, HD_For KENWORTH, HD_For MAN, HD_For MAXXFORCE, HD_For MILLER, HD_For MWM, HD_For NEOPLAN, HD_OBD, HD_For PACCAR, HD_For PETERBILT, HD_For RENAULT, HD_For SETRA, HD_For SITCAR, HD_For STERLING, HD_For STEYR, HD_For TATA, HD_For VOITH, HD_For VOLVO, HD_For VOLVO_CE, HD_For WABCO_ABS, HD_For WESTERN_STAR, HD_For ZF, For MACK, For PERKINS, For SCANIA, For UD

Support Engine List:

For Caterpillar, For Cummins, For Detroit, For Isuzu, For Paccar, For Perkins, For Volvo, For Maxxforce, For Hino, For Doosan, For Fuso

X-431 V is a new Android-based vehicle trouble diagnostic device developed for internet applications via Bluetooth/Wi-Fi. X431 V combines the advantages of X-431 IV and X-431 Diagun III. X-431 V is suitable for a wide vehicle coverage, it can share maintenance data and case library, provide instant maintenance information, and build public and private maintenance social circles. X-431 V could support 12V light trucks. Moreover, X-431 V could coordinate with X431 Smartlink C2.0 Truck Module, then could support 24V trucks.

Highlights:

1. Global Version, No IP Limitation.
2. 2 Years Free Update Online. When the Free Update Expired, the Update Cost will be Here for One Year and Here for Two Years.
3. NEW!!! Support CANFD and DOIP car protocols, Supports Topology Mapping diagnosis: Newly update VCI DBScar VII can work on the car with CANFD and DOIP protocols. Communicate more car models and run faster diagnostics.
4. Wilder Vehicle Coverage: Covers more than 98% of the cars on the market from the USA, European, Asia and so on.
5. Advanced ECU Coding & Online Coding: Perform advanced ECU coding on more vehicles. Online Coding to update the vehicle ECU software, refresh hidden features to disable annoying functions, like disabling seat belt beep, and daylight running light, and Match certain components after repairs or replacements
6. 37 Special Functions: Comprehensive services, calibrations, resets, initializations, relearns options for daily auto maintenance services and up to 300 for special models.
7. Bi-Directional Control (Active Tests): The intelligent diagnostic scanner can output commands to ECUs, read data, and monitor the operation of the actuators. Through bi-directional operation, you can quickly know if a specific system, component, or subsystem is functioning properly or not.
8. OE Level All Systems Diagnostics and Auto VIN/Scan VIN/License.
9. More Advanced Functions, Supports Volkswagen Audi guidance function.
10. Support Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc
11. Support Diagnosing Heavy Duty Trucks with Extra X431 Smartlink C2.0 Truck Module: You can purchase an additional heavy-duty truck diagnostic module (a Bluetooth adaptor) that works with X431 V to diagnose all truck systems.

UPGRADED HIGH-END HARDWARE CONFIGURATION: What is upgraded in V 5.0?

1. 64GB storage (can be extended to 128G RAM with TF card): Keep all your customer information, data files, and vehicle records well-organized.
2. Branded Tablet with Android 10.0 system and 4.0 MP Pixel Front & Rear Camera, updated the ECU from 1.4GHz to 2.0GHz. Upgraded the Android OS system from 9.0 to 10.0. ease of use, speed, and functionality.
3. Fixed battery life issue. Now 6300 mAh lasting nearly 10 hours of continuous use on a single charge. improved the battery performance to increase the battery life.
4. Fixed more bugs and Upgrade new car makes up to 2024 models, V 4.0 has been changed to V 5.0.
5. Dual Wi-Fi (5GHz): Supports both 2.4GHz and 5GHz Wi-Fi, which offers faster, more stable, strong anti-interference data transmission (equivalent to USB communication). And the actual wireless working range is more than 10m.
6. NEW!!! Support CANFD and DOIP car protocols: Newly updated VCI DBScar VII can work on the car with CANFD and DOIP protocols. Communicate more car models and run faster diagnostics.

LAUNCH X431 PRO3(V 5.0) Support Extension Modules: (So that you can perform more comprehensive vehicle inspections with LAUNCH X431 V )

* X431 XPROG3 GIII (IMMO For VAG Group Above 3.5)
* Launch BST-360 (Test Your Battery with Accuracy and Simplicity)
* X431 Smartlink C2.0 Truck Module (Diagnose gasoline vehicles & Diesel Trucks)
* X431 TSGUN or X431 i-TPMS (Activate all sensors, tpms relearn, program only Launch Sensors)
* WIFI Printer (Print codes and their definitions, along with live data, coding information and relearn procedures)
* Launch VSP-600 Inspection Camera Videoscope

Notice:

1. Dealer Code: 86A or 86K.
2. Launch X431 V Supports 12V/ 24V Gasoline (Petrol) Cars, 12V for Some Diesel Cars, Not for Trucks, for truck you need but extra X431 Smartlink C2.0 Truck Module. If you only work on 24V cars you can choose LAUNCH X431 V SmartLink HD Commercial tool
3. Authorization: When you receive the device, contact our customer sevice and advise the Serial number of your device, also the language and country you want to open authorization, after authorization finished, then you can log on Launch DBSCar Website to register CC account and download software you want.

Features

1. Bigger, Larger storage and Faster working speed than LAUNCH X431 V
2. 10.1 inch multi touch capacitor screen give you better view for diagnose and data stream.
3. Compact size plastic carrying case design, super easy for storage and carrying.
4. Lead to wide vehicles diagnostic community
5. Allows you to print our diagnostic data with Wifi printer.
6. 6600mAh Li battery can keep working 8 hours,portable and reasonable PDA design, easy carry with small size
7. Panel PC: High configuration of hardware , fast running speed
8. Capacitor Screen: Multi-touch capacitor screen, more smooth operation
9. WIFI Diagnosis: Wireless communication between intelligent mobile terminal and DBSCar connector via Bluetooth
10. Portable: Reasonable PDA design, small size for easy carry
11. Optimized Interface: Brand new operation interface design, interface more friendly and operation much easier
12. Wifi communication: Support WIFI network
13. Android System: Users can install and Android software
14. Numerous Additional Functions: Photo, video, multimedia, other software application,etc.

VIEW MORE INFO ABOUT V   Click here＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞

Launch X431 SmartLink C V2.0 Heavy Duty Truck Module work for Launch X431 V , X431 Pros3 & X431 PRO5

Launch X-431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7 Cortex-M7, 8G storage, 256M storage, 320*480 resolution. It supports Bluetooth, Wi-Fi, USB and other communication methods, and can be used with X431 V , X-431 PRO3S and PRO5 series.

It also support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test. Covering Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.

Launch X431 SmartLink C V2. Bullet Points:

1. Launch X-431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7 Cortex-M7, 8G storage, 256M storage, 320*480 resolution.
2. Update Version of Launch X431 HDIII: The transmission speed is faster and more stable, and the visual operation interface makes it more convenient.
3. Support Bluetooth, Wi-Fi, USB and other communication methods.
4. Can be used with Launch X431 V , X-431 PRO3S and X431 PRO5 series.
5. Support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test.
6. Support commercial vehicles, passenger vehicles, new energy and other models: Covering Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.
7. Support super remote diagnosis.
8. 2 years free update (Starting October 19, 2023), the Annual Subscription cost is 549USD/year after free update service.

Note: LAUNCH X-431 HD SmartLink C 2.0 Module cannot be used alone. It only works with LAUNCH Tablet of X431 V , X431 PRO3, X-431 PRO3S, X431 PRO5 Series.

Launch Smartlink C Feature:

Work as a VCI (Vehicle Communication Interface)
Work as a Local J2534 PassThru Device
Work as a Remote J2534 PassThru Device

VIEW MORE INFO ABOUT Smartlink  Click here＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞

Package List:

1set x X431 V (Full Set with All Cables and Adapters)
1set x X431 SmartLinkC V2.0 Heavy Duty Truck Module(With All Cables and Adapters)