Please send us the serial number before purchase, we will check it first.

Notice:
1. This renewal card is used for Launch X431 V+ SmartLink HD (PRO3 LINK HD) with a 12V Passenger Vehicle license activated.
2. It will take 24-48 hours for the Launch technicians to operate the update service.

HOW TO ACTIVATE 12V Passenger Vehicle LICENSE?

1. Login X431 PAD
2. Go to Local Diagnose – Store– Passenger Vehicle software activation/ renewal- Subscription Renewal Card
3. X431 PAD will ask to submit a 24-digit renew card pin code, Put The 24-digit pin we sent you.
4. Manually enter pin code and submit
5. Activation done. Software will expire 1 year from now

This is an add-on software subscription license for Launch X431 diagnostic tablets.
Can be applied to LAUNCH X431 PAD series (PAD VII, PAD V, X431 V 8inch, X431 V , Pad II, X431 Throttle etc)

Tesla software can be purchased here or directly from X431“Mall”by card payment.

Software service, no need shipping. Provide your X431 device serial number to activate license after payment.
You can update for one year. It is an optional software because it cost a lot to develop.

Current software version: V10.06 

There is a list of compatible models of TESLA software:

Tesla Model S, Model X, Model 3 2014-2020
Model S 2014 2015 2016 2017 2018 2019 2020
Model X 2016 2017 2018 2019 2020
Model 3 2014 to 2020

Accessible systems

BDY
THC
TPMS
PARK2
SDM by BOSH
TAS
BMS
ESP

Tesla Software Update Log
V10.05

1. Added DTCs for some systems of Model S and Model X.
2. Added the following service functions for systems (such as the battery management system, tire pressure monitoring system, drive inverter, and airbag system) of Model 3, Model S, and Model X: reset contactor stress counter U019, clear contactor stress result, learn VIN automatically, reset crash data automatically, reset anti-theft system, read resistance
3. Added the following common service functions: clear airbag crash data, read EEPROM, brake bleeding, calibrate charging door, key learning, key service, AIR service
4. Added the instructions for the airbag crash data reset function of each model.
5. Optimized the car model menu structure. Added the special function menu.
6. Optimized the quick test and system scanning functions.

Has your software of X431 PAD III / PDA V been outdated? Want to update it??
Now to save your money, we provide one year update service for all customers who have X431 PAD III / PDA V and the free update service has been expired.

Note:

1. Before You purchase the update service, please provide the serial number for confirm if we can help to provide the update service first. 
Because the devices which were brought from overseas dealer can not be provided update service. Please notice this
2. It will need 3 Working Days for the Launch technician to do the update service
3. Very easy to operate, no need shipping
4. Suitable for: Launch X431 PAD III / PDA V
5.Only for Passenger Vehicle software.

How to make it work?

1. After you place an order on our website and check out, please provide us your device serial number.
2. We will open one year update authorization for you
3. The Launch technician will open the update service online, no need shipment
4. then you can go back to homepage of your X431 PAD VII and click “Update” to download new update.

If you want to update your Launch X431 ECU & TCU Programmer after one year free update service expired, you can buy this service to extend another one year free update.

Note:

1. Before You purchase the update service, please provide the serial number for confirm if we can help to provide the update service first.
Because the devices which were brought from overseas dealer can not be provided update service. Please notice this
2. it is One Year Update Service
3. Very easy to operate, no need shipping
4. Suitable for: Launch X431 ECU & TCU Programmer
5. it will need 24hours for the Launch technician to do the update service

How to get the Subscription Renewal Service?

1. After you place an order on our website and check out, please provide us your device serial number.
2. We will open one year update authorization for you.
3. The Launch technician will open the update service online, no need shipment.
4. We will send Subscription Renewal Card with Card Number and Password to you by email.

How to activate the Subscription Renewal Card?

1. Tap the X431 application icon on the home screen to launch it.
2. Tap “Login” on the upper right corner of screen to log in the system (Note: Please make sure the tool has a strong Wi-Fi connection).
3. Open the X431 Lanuch app——>Software Update ——>Renewal
4. Choose the Use renewal card ——>renew standard software configuration
5. Click ”Confirm” in the lower right corner
6. Enter the 24-digit activation code

Highlights:

1. IMMO Function Activation For 1 Year, More cost-effective
2. No real shipping. Please provide the serial number to us to confirm and activate the license.
3. Compatible with X431 Pros Star, Pros Elite, PRO ELITE, Pro3 V5.0 (V+ V5.0), PROS V5.0,  Pro3S+ V5.0, LAUNCH PRO5, PRO TT, PRO3 ACE, PRO DYNO, PRO3 APEX, PAD II, PAD V, PAD VII, PAD V (PAD V ELITE), PAD VII ELITE
This will expand the anti-theft function just like IMMO PLUS, which more cost-effective upgrades service to help every auto mechanic, DIYer, etc. expand your business!!

PLEASE Note:

1. After placing your order, please let us know the serial number of your device and we will open it for you within three working days, no extra card is needed, saving you all the trouble!
2. No need for Shipping, please pass us the serial number of your device.
3. Need to be used with Launch GIII X-Prog 3
4. LAUNCH official regulations: The first-time activation of IMMO software authorization does not support one-year service. You must purchase a two-year upgrade service. After the two-year upgrade expires, if you need to renew, you can choose to activate the service for one or two years.

How to activate IMMO Software License?

1. For the first activation, you must purchase two-year upgrade service.
*After two years software license expires, renew it with any type of license above.

2. Provide the serial number of your Launch tool to us to confirm and activate the license. It will be activated within 2 days.

3. After activation, enter the Software Update function on the device menu to update the IMMO software package. Then the Launch tool will have the same immobilizer function as the X-431 IMMO Plus or X-431 IMMO Elite.

After activating IMMO software package, your PAD VII or PADV will have the following IMMOBILIZER software.
FYI: To use remote/transponder cloning/generation functions, you should have Launch X431 key programmer add-on modules.

Service for Launch X431 IMMO Activation Software list:

• Anti-theft matching instrument overseas online configuration (full-featured) Software List

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via the SmartLink Service Platform. The SmartLink B applies to vehicles that comply with CAN/ DoIP/ CAN FD/ J2534 diagnostic protocol standards.

Please Note Before the Purchase:

1. Only supports devices using Smartlink C as VCI. Such as X431 PAD V Elite, PAD VII Elite, PRO5, Smartlink C. Please note that the Heavy Truck module does NOT support the opening of Super Remote.
2. Before you buy this 50 times super remote function, please make sure you have activated the function on your device. The first-time Super Remote Activation License inside comes with the free 3 times the card, valid for one year
3. You can buy the card according to your needs after the free 3 times card is used up. There is no annual fee, the charge is per time.
4. USA, Canada, Mexico, Columbia, Australia, Brazil, Japan are not supported at the moment.
5. Please make sure to provide the serial number of your device to us at sales@x431tool.com after purchase.
6. This Super Remote Activation License does not need shipping, please give us 2-3 working days to process it.

Launch X431 Smartlink C Features

– Compatible with LAUNCH tools, OE tools, or any other diagnostic tools.
– SmartLink can be used not only for remote diagnosis but also for local diagnosis by working with LAUNCH intelligent diagnostics.
– Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU.
– Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform.

The SmartLink B system consists of the following two parts:

• SmartLink Service Platform – For binding the SmartLink B dongles and accepting the remote repair orders.
• SmartLink B Dongle – Works with the compatible diagnostic tool to perform diagnosis of the vehicle connected to the SmartLink C dongle.

Super Remote Diagnosis Solution:

– SRDs are comprised of SmartLink C, SmartLink B, and Cloud Platform.

– The SmartLink C can be connected to the vehicle, and the SmartLink B can be connected to any diagnostic device.

– The remote diagnosis will be carried out on the SmartLink platform.

Launch X431 SmartLink C Service Platform:

SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C users can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

If you want to update your Launch X431 PRO3S+ with HDIII Gasoline & Diesel Diagnostic Scanner after 2 years free update service expired, you can buy this service to extend another one year free update.

Note:

1. Before You purchase the update service, please provide the serial number for confirm if we can help to provide the update service first. 
Because the devices which were brought from overseas dealer can not be provided update service. Please notice this
2. it is One Year Update Service
3. Very easy to operate, no need for shipping
4. Suitable for Launch X431 PRO3S+ with HDIII Gasoline & Diesel Diagnostic Scanner
5. it will need 24 hours for the Launch technician to do the update service

How to get the Subscription Renewal Service?

1. After you place an order on our website and check out, please provide us your device serial number.
2. We will open one year update authorization for you.
3. The Launch technician will open the update service online, no need shipment.
4. We will send Subscription Renewal Card with Card Number and Password to you by email.

How to activate the Subscription Renewal Card?

1. Open the X431 Lanuch app——>Software Update ——>Renewal
2. Choose the Use renewal card ——>renew standard software configuration
3. Click ”Confirm” in the lower right corner
4. Enter the 24-digit activation code

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via the SmartLink Service Platform. The SmartLink B applies to vehicles that comply with CAN/ DoIP/ CAN FD/ J2534 diagnostic protocol standards.

Please Note Before the Purchase:

1. Only supports devices using Smartlink C as VCI. Such as X431 PAD V Elite, PAD VII Elite, PRO5, Smartlink C. Please note that the Heavy Truck module does NOT support the opening of Super Remote.
2. Before you buy this 20 times super remote function, please make sure you have activated the function on your device. The first-time Super Remote Activation License inside comes with the free 3 times the card, valid for one year
3. You can buy the card according to your needs after the free 3 times card is used up. There is no annual fee, the charge is per time.
4. USA, Canada, Mexico, Columbia, Australia, Brazil, Japan are not supported at the moment.
5. Please make sure to provide the serial number of your device to us at Service@x431tool.net after purchase.
6. This Super Remote Activation License does not need shipping, please give us 2-3 working days to process it.

Launch X431 Smartlink C Features

– Compatible with LAUNCH tools, OE tools, or any other diagnostic tools.
– SmartLink can be used not only for remote diagnosis but also for local diagnosis by working with LAUNCH intelligent diagnostics.
– Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU.
– Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform.

The SmartLink B system consists of the following two parts:

• SmartLink Service Platform – For binding the SmartLink B dongles and accepting the remote repair orders.
• SmartLink B Dongle – Works with the compatible diagnostic tool to perform diagnosis of the vehicle connected to the SmartLink C dongle.

Super Remote Diagnosis Solution:

– SRDs are comprised of SmartLink C, SmartLink B, and Cloud Platform.

– The SmartLink C can be connected to the vehicle, and the SmartLink B can be connected to any diagnostic device.

– The remote diagnosis will be carried out on the SmartLink platform.

Launch X431 SmartLink C Service Platform:

SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C users can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via the SmartLink Service Platform. The SmartLink B applies to vehicles that comply with CAN/ DoIP/ CAN FD/ J2534 diagnostic protocol standards.

Please Note Before the Purchase:

1. Only supports devices using Smartlink C as VCI. Such as X431 PAD V Elite, PAD VII Elite, PRO5, Smartlink C. Please note that the Heavy Truck module does NOT support the opening of Super Remote.
2. Before you buy this 10 times super remote function, please make sure you have activated the function on your device. The first-time Super Remote Activation License inside comes with the free 3 times the card, valid for one year
3. You can buy the card according to your needs after the free 3 times card is used up. There is no annual fee, the charge is per time.
4. USA, Canada, Mexico, Columbia, Australia, Brazil, Japan are not supported at the moment.
5. Please make sure to provide the serial number of your device to us at Service@x431tool.net after purchase.
6. This Super Remote Activation License does not need shipping, please give us 2-3 working days to process it.

Launch X431 Smartlink C Features

– Compatible with LAUNCH tools, OE tools, or any other diagnostic tools.
– SmartLink can be used not only for remote diagnosis but also for local diagnosis by working with LAUNCH intelligent diagnostics.
– Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU.
– Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform.

The SmartLink B system consists of the following two parts:

• SmartLink Service Platform – For binding the SmartLink B dongles and accepting the remote repair orders.
• SmartLink B Dongle – Works with the compatible diagnostic tool to perform diagnosis of the vehicle connected to the SmartLink C dongle.

Super Remote Diagnosis Solution:

– SRDs are comprised of SmartLink C, SmartLink B, and Cloud Platform.

– The SmartLink C can be connected to the vehicle, and the SmartLink B can be connected to any diagnostic device.

– The remote diagnosis will be carried out on the SmartLink platform.

Launch X431 SmartLink C Service Platform:

SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C users can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via the SmartLink Service Platform. The SmartLink B applies to vehicles that comply with CAN/ DoIP/ CAN FD/ J2534 diagnostic protocol standards.

Please Note Before the Purchase:

1. Only supports devices using Smartlink C as VCI. Such as X431 PAD V Elite, PAD VII Elite, PRO5, Smartlink C. Please note that the Heavy Truck module does NOT support the opening of Super Remote.
2. Before you buy this 1 time super remote function, please make sure you have activated the function on your device. The first-time Super Remote Activation License inside comes with the free 3 times the card, valid for one year
3. You can buy the card according to your needs after the free 3 times card is used up. There is no annual fee, the charge is per time.
4. USA, Canada, Mexico, Columbia, Australia, Brazil, Japan are not supported at the moment.
5. Please make sure to provide the serial number of your device to us at Service@x431tool.net after purchase.
6. This Super Remote Activation License does not need shipping, please give us 2-3 working days to process it.

Launch X431 Smartlink C V2.0 Features

– Compatible with LAUNCH tools, OE tools, or any other diagnostic tools.
– SmartLink can be used not only for remote diagnosis but also for local diagnosis by working with LAUNCH intelligent diagnostics.
– Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU.
– Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform.

The SmartLink B system consists of the following two parts:

• SmartLink Service Platform – For binding the SmartLink B dongles and accepting the remote repair orders.
• SmartLink B Dongle – Works with the compatible diagnostic tool to perform diagnosis of the vehicle connected to the SmartLink C dongle.

Super Remote Diagnosis Solution:

– SRDs are comprised of SmartLink C, SmartLink B, and Cloud Platform.

– The SmartLink C can be connected to the vehicle, and the SmartLink B can be connected to any diagnostic device.

– The remote diagnosis will be carried out on the SmartLink platform.

Launch X431 SmartLink C Service Platform:

SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C users can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.