Diagram of LAUNCH X-431 24V CAN adapter expansion module (SO816)  Connecting the LAUNCH DBScar Trailer-16 7 7 diagnostic connector (SO817) with a LAUNCH trailer diagnostic device supporting TEBS-E diagnostic software.

Package includes:

1pc x LAUNCH X-431 24V CAN Adapter Extension Module

Diagram of LAUNCH X-431 24V CAN adapter expansion module (SO816)  Connecting the LAUNCH DBScar Trailer-16 7 7 diagnostic connector (SO817) with a LAUNCH trailer diagnostic device supporting TEBS-E diagnostic software.

Package includes:

1pc x LAUNCH DBScar Trailer-16 7 7 Diagnostic Connector

How to connect the LAUNCH DBScar Trailer-16 7 7 connector

This adapter is designed to connect modern diagnostic scanners with an OBD2 connector to TESLA cars (2019, 2020, 2021,2023 Model 3 and Model Y). The OBD2 port allows you to read CANBUS data that is not available on the main screen: battery temperature, engine temperature, cell voltage, etc.

Specifications:

12 Pin Male Female Connector for Tesla 2012-2015 model S/X OBDII diagnostic harness electronic cable of new energy (Before placing an order,
please confirm the OBD interface model of your vehicle)

1. The premium material gives the cable excellent flexibility and durability.
2. Small size, light weight, easy to store, easy to carry and use.
3. Plug and play, easy to install, does not affect the function of the original car.
4. Corrosion and wear resistance.
5. Power supply voltage: 9-16V

This connector is suitable for Model S and Model X models. It can test fault codes, clear fault codes, and support special functions. Check the official website to find out which special functions are supported. (http://qcar.x431.com/qcar/#/)

The specific wiring diagram of the Tesla-12+20 connector:

Part [1] is the Tesla-12+20 connector (12PIN) wiring diagram, which is applicable to S(X) models produced before September 2015 (including September);
Part [2] is the Tesla-12+20 connector (20PIN) wiring diagram, which is suitable for S(X) models produced after September 2015.

Package Includes:
1*OBDII TO 12Pin for Tesla Model S/X(2012-2015)

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via SmartLink Service Platform. The SmartLink B applies to vehicles that comply with CAN/ DoIP/ CAN FD/ J2534 diagnostic protocol standard.

The SmartLink B system consists of the following two parts:

SmartLink Service Platform – For binding the SmartLink B dongles and accepting the remote repair orders.
SmartLink B Dongle – Works with the compatible diagnostic tool to perform diagnosis of the vehicle connected to the SmartLink C dongle.

Launch X431 SmartLink B Features
Compatible with LAUNCH tools, OE tools or any other diagnostic tools
SmartLink can be used not only remote diagnosis but also local diagnosis by working with LAUNCH intelligent diagnostics
Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU
Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform

Requires Activation card.

Launch X431 SmartLink B Service Platform:
SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C user can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

Launch X431 SmartLink B Management Modes:

The service provider can select ONE of the two Management Modes:
The service provider manages the Smartlink C account status of the customer.
The service provider can activate the Smartlink C under his own account and manage the Smartlink C (post remote diagnosis request, license renewal) for the customer.
The customer doesn’t need to do anything on the platform, he just needs to contact the service provider and connect the Smartlink C hardware to the vehicle.
The customer manages the Smartlink C account status himself.
The customer can register his own user account on the SRDs platform and manage the Smartlink C (post remote diagnosis request, license renewal) himself.
The service provider can “Pre-bind” the customer’s Smartlink C, after “Pre-bind”, the customer’s request can only be seen by this service provider. No worry about other provider taking the customer.

NOTE: Each Smartlink can be activated only in one account.

How Does the LAUNCH SMARTLINK REMOTE DIAGNOSIS WORK?
This picture may help you better understand the complete procedure of the Smartlink remote diagnosis.

Launch X431 SmartLink B Packing List:
The following accessory items are for reference only. For detailed items, please consult with a local agency or check the packing list supplied with the device.

SmartLink B Dongle – For SmartLink Service Subscriber
OBD II Extension Cable – Connects the dongle to the vehicle’s DLC port
CAT-6 Crossover Cable – Connects the dongle to the network modem
Data Cable – Connects the dongle to the PC via the data cable when as a J2534 PassThru device.

The SmartLink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, SmartLink B (Business), as a SmartLink Service Provider, can accept remote repair orders issued by SmartLink C users via SmartLink Service Platform.

Launch X431 SmartLink C Features

1. Compatible with LAUNCH tools, OE tools or any other diagnostic tools
2. Support more advanced protocols like J2534, DoIP, CAN FD, CAN 2.0, RP1210, D-PDU
3. Publish request and accept offer from Launch Super Remote Diagnosis Reservation Platform
4. SmartLink can be used not only remote diagnosis but also local diagnosis by working with LAUNCH intelligent diagnostics

Requires Activation card

SRDs SmartLink:
Super Remote Diagnosis Solution:
SRDs is comprised of SmartLink C, SmartLink B and Cloud Platform.
The SmartLink C can be connected to the vehicle, and the SmartLink B can be connected with any diagnostic device.
The remote diagnosis will be carried out on the SmartLink platform.

Launch X431 SmartLink C Service Platform:
SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C user can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.

How Does the LAUNCH SMARTLINK REMOTE DIAGNOSIS WORK?
This picture may help you better understand the complete procedure of the Smartlink remote diagnosis.

Launch X431 SmartLink C Packing List:
The following accessory items are for reference only. For detailed items, please consult with a local agency or check the packing list supplied with the device.

SmartLink C Dongle – For SmartLink Service Provider
OBD II Extension Cable – Connects the dongle to the VCI of the compatible diagnostic tool
CAT-6 Crossover Cable – Connects the dongle to the network modem
Power Adaptor – Supplies power to the dongle through an AC outlet.

LAUNCH RH850 Adapter Board for Data Reading & Writing of Various RH850 Microcontrollers

1.Product Function:

– OBD2 Extension Cable For Launch X431 PRO ELITE/ PROS ELITE/ V/ V+ and etc allows you to connect X431 device with your car’s OBD2 port.
– This is for extension, if you have a need you can buy it, not necessary.

Highlights for Launch X431 CAN FD:

STABLE & DURABLE This CAN FD Adapter is stable, durable and portable. X431 CAN FD Adapter is designed to connect to compatible vehicle communication interfaces (VCIs) to enable its tablets to communicate
via the CAN FD (flexible data-rate) communications protocol and diagnose the vehicle.

Fit for Car Diagnostic OBD2 Scanner
Can FD Adapter work for X431 Throttle, X431 Pad II AE, X431 Torque, X431 Turbo, X431 V, X431 V , X431 Pro3, X431 Pro3S , X431 Pad II, X431 PADIII, X431 DIAGUN V, X431 PRO MINI,
X431 PROS MINI etc.

Compatibel Vehicles
Can FD Compatible New Cars Vehicles. Such as GM, Ford, AUDI, BMW, BMW MINI, JAGUAR, LAND ROVER etc. (reading fault codes, data streams and other special functions).

WHY YOU NEED THIS
For example: ➤1.The Bluetooth connector of X431 3S  and X431 PADIII does not directly support this CAN FD car communication protocol, so it is necessary to purchase this CAN FD adapter
separately!
➤2.The 2020 Kovoz, Angkola, Chuangku, etc. cannot be measured with X431, and even maintenance of the lamp cannot be eliminated. At this time, this X431 adapter is neccessary!

ADVANTAGES of CAN FD COMMUNICATION PROTOCOL
Able to support high loads,the transfer rate can reach 64 bytes in a single data frame,avoiding the frequent data splitting situation. CAN FD uses variable ratethe highest rate can reach
10MB/S while the traditional can protocol is only 1MB/S.

EASY STEP TO USE:
Step1: Connect the main cable’s female adapter to the vehicle Data Link Connector(DLC) on the VCI unit and tighten the captive(thumb) screws.
Step 2: Connect the CAN FD Adapter’s 16-PIN female connector to the main cable’s male adapter.
Step 3: Connect the attached CAN FD adapter to the vehicle’s DLC which is generally located under the vehicle dashboard.

Package List:

1pc x X431 CAN FD Connector

The applicable models are:
2019- Corolla, Levin, ALLION, Lingshang, Yize, Camry, RAV4, AVALON, Crown, and WILDLANDER, equipped with TMLF18D and TMLF15 smart boxes.

Compatible device: Launch X431 IMMO Plus, IMMO Elite, IMMO Pro, PAD V/PAD VII+ X-prog3 + IMMO Package.

Package Including:
CH-01: Toyota H Non-smart Key All Keys Lost Adapter
For Toyota 8A mechanical keys all lost (dismantle and read the immobilizer box).
The applicable models are:
2014 onwards Corolla, Levin, Camry, Highlander, and Prado

CH-02: Toyota 24 Pin Smart Key All Keys Lost Adapter
For F15/F18 smart keys all lost (dismantle and read the immobilizer box).
The applicable models are: 2019 onwards such as Highlander, Alphard, and Vellfire, equipped with TMLF12 smart box

CH-03:  Toyota 27 Pin Smart Key All Keys Lost CH-03 Cable
For 4A, 8A-A9, and 8A-AA smart keys all lost (dismantle and read the immobilizer box)